Overview of E+H Product Model Configuration Tool
The E+H product model configuration tool is an online selection assistant officially provided by Endress+Hauser, designed to help engineering technical personnel and procurement personnel quickly generate the complete model code of the required instrument. Through this tool, users can obtain accurate model information without consulting thick selection catalogs.
When using this tool, simply enter a known product model or follow the prompts to select parameters step by step, and the system will automatically match and output the corresponding configuration result.Correct use of the configuration tool can significantly reduce the selection error rate and improve procurement efficiency.
How to Use the E+H Product Model Configuration Tool
Step 1: Enter the Product Model
On the main interface of the configuration tool, find the product model input box. Please enter the E+H product model you know, such as series codes like "PMP71" or "CM44". The system will automatically suggest and display matching product series based on the input.
Step 2: Perform Parameter Configuration
After selecting the product series, the tool will display configurable parameter options, such as process connection, measuring range, output signal, certification requirements, etc. Please select each item according to the actual working conditions, and the tool will generate the corresponding complete model code in real time.
- Confirm the product series and basic model.
- Select options such as process connection, sensor type, electronic components, etc. in sequence.
- Check the generated complete model code to ensure it matches the requirements.
Description of E+H Product Comparison Function
The product comparison function allows users to compare up to three E+H product models side by side, making it easier to analyze parameter differences between different models. This function is especially suitable for solution evaluation during the selection stage.
Please enter the product models to be compared in the comparison input boxes. A maximum of three products can be compared simultaneously. The system will display the key technical parameters of each model in a table format, making it easy for users to judge quickly.
Product Comparison Operation Steps
- Enter the first product model in the comparison input box.
- Continue entering the second product model (optional).
- Continue entering the third product model (optional).
- Click the compare button to view parameter differences.
Example of Product Comparison Parameters
The table below shows an example comparison of three E+H product models on key parameters. The actual comparison result shall be based on the tool output.
| Parameter | Model A | Model B | Model C |
|---|---|---|---|
| Measuring range | 0-10 bar | 0-16 bar | 0-25 bar |
| Output signal | 4-20 mA | 4-20 mA + HART | PROFIBUS PA |
| Process connection | G1/2 | G1/2 | NPT1/2 |
Precautions and Suggestions for Use
- When entering the model, please ensure the spelling is accurate to avoid configuration result deviations caused by incorrect model numbers.
- The comparison function supports a maximum of three models. If the number is exceeded, compare in batches.
- It is recommended to reconfirm the model code generated by configuration with the E+H official selection catalog or technical support.
- For special working conditions (such as high temperature, high pressure, corrosive media), please consult E+H technical personnel.
Through the E+H product model configuration tool and comparison function, engineering technical personnel and procurement can complete instrument selection more efficiently, reduce communication costs, and ensure the smooth progress of the project.