t-mass 150 Spare Parts List Overview
This spare parts list applies to the t-mass 150 thermal mass flowmeter, covering commonly used spare parts such as electronic modules, display modules, housing components, cable glands, and installation kits. Engineering technicians and procurement personnel can quickly locate the required components based on the order numbers.
The table includes Nr (Item Number), Order Number, and Specification Description. Some spare parts are supplied as kits; please pay attention to quantity and material information.
Electronic and Display Module Spare Parts
Main Electronic Module and Display Module
The main electronic module and display module are the core components of the flowmeter. When replacing, ensure model compatibility.
| Item No. | Order Number | Specification Description |
|---|---|---|
| 37 | 71158893 | Terminal block*10, 8-pin, t-mass 150 |
| 30 | XPD0022- | Electronic plug-in T 150, Main electronic module |
| 40 | XPD0024- | Display module, suitable for GT18/GT19/GT20 housing |
Display module applicable scope includes FMP50/51/52/53/54/55/56/57, FMR50/51/52/53/54/56/57, FMR60/62/67, FHX50, Promass 200/TB2, Prosonic Flow 200, t-mass 150, Promag 200, Prowirl 200. This module consists of Display SD02, spiral cable, ribbon cable, and connector cover.
Housing and Sealing Components
Aluminum Cover Assembly
The aluminum cover assembly is used for housing protection of the t-mass 150, available in window glass and blind cover versions, both including gaskets.
| Item No. | Order Number | Specification Description |
|---|---|---|
| 20 | 71158894 | Aluminum cover assembly, window glass, gasket; Material: coated aluminum cover, O-ring 88.50x3.53 NBR, PTFE coating |
| 20 | 71158895 | Aluminum cover assembly, blind cover, gasket; Material: coated aluminum cover, O-ring 88.50x3.53 NBR, PTFE coating |
Housing Gasket and Housing Assembly
The housing gasket assembly and housing assembly are used to ensure sealing and pressure compensation. Material compatibility must be considered during replacement.
| Item No. | Order Number | Specification Description |
|---|---|---|
| 65 | 71158896 | Housing gasket assembly, t-mass 150; includes O-ring 88.50x3.53 NBR PTFE coated (electronic compartment cover), O-ring 36.10x3.53 HNBR (housing/sensor) |
| 19 | 71158897 | Housing assembly, t-mass 150; includes filter plug (nickel-plated brass), pressure compensation filter (PTFE), hex socket set screw M8x12 A2 |
Gasket Assembly
- 71158898: Gasket assembly, includes gasket ring 35.0/26.7x2.0, HNBR, 316.
- 71158900: Gasket assembly, includes gasket ring 35.0/26.7x2.0, EPDM, 316.
Cable Gland and Adapter Spare Parts
Cable glands and adapters are used for cable entry sealing and interface conversion. Explosion-proof types must be selected for hazardous areas.
| Item No. | Order Number | Specification Description |
|---|---|---|
| 15 | 50103658 | Cable gland |
| 15 | 50098036 | Explosion-proof cable gland, Kit 10 cable glands M20x1.5 Ex |
| 15 | 50098041 | Adapter, Kit 10 extension M20x1.5/G 1/2" |
| 15 | 71115505 | M20x1.5/G 1/2" adapter |
| 15 | 50098042 | Adapter, Kit 10 extension M20x1.5/NPT 1/2" |
| 15 | 71115509 | M20x1.5/NPT 1/2" adapter |
| 15 | 71240315 | Socket, suitable for t-mass T 150 |
| 15 | 71240316 | Adapter, suitable for t-mass T 150 |
Installation and Accessory Components
Safety Chain and Sunshade Cover
- 71240321: Safety chain, t-mass T150; suitable for applications with pressure ≥ 4.5 bar (65.27 psi) and PEEK ferrule.
- 71240320: Sunshade cover, includes weather protection cover and installation materials.
Insertion Installation Kit
The insertion installation kit is used to install the sensor into the process pipe. Different models are selected based on pressure conditions.
| Order Number | Specification Description |
|---|---|
| DK6MB- | Insertion installation kit DK6MB; welded to the outside of the pipe |
| DK6002- | Thermal liquid mass flowmeter T 150 installation kit; used to install the insertion version into the process pipe |
| DK6003- | Hot tap process pressure installation kit; suitable for t-mass 6I3B, 6I5B, 6BAB, 6TAB; allows sensor insertion and removal under pressure without process interruption |
| DK6ML- | Insertion valve installation kit DK6ML; for insertion sensors, allows sensor removal at atmospheric pressure, ball valve provides process isolation; maximum process pressure 20 bar / 290 psi |
RFID Tag
XPRFID-: Spare RFID TAG, includes RFID tag, fixing wire, and crimp sleeve.
Selection and Replacement Precautions
- Confirm the flowmeter model and spare part applicability, e.g., the display module must match GT18/GT19/GT20 housing.
- Explosion-proof cable glands (e.g., 50098036) must be used in hazardous areas.
- For high-pressure or pressurized operations, prioritize the Hot tap installation kit (DK6003-) or valve installation kit (DK6ML-).
- Pay attention to material compatibility when replacing seals, such as HNBR, EPDM, NBR, and PTFE coatings.
- Installation kits must be selected based on pipe specifications and process pressure; consult the manufacturer for confirmation if necessary.