D8EB Spare Parts List Overview
This spare parts list applies to Endress+Hauser D8EB series transmitters and related flowmeters, covering key spare parts such as intrinsically safe barriers, electronic inserts, aluminum housings, sealing rings, explosion-proof cable glands, and adapters. All spare parts are provided with order numbers, specification descriptions, and applicable models, making it easy for engineering technicians and procurement personnel to quickly match.
Correct selection of spare parts ensures safe operation of instruments in hazardous areas and extends equipment service life. The following is a detailed introduction categorized by function.
Intrinsically Safe Barriers and Connection Components
Intrinsically Safe Barrier (Order No. 71185785)
This intrinsically safe barrier is used for Promass 100, CNGmass, LPGmass, LNGmass, and other models to achieve intrinsically safe explosion-proof isolation. It is the core component for signal transmission in hazardous areas, and compatibility with the transmitter model must be confirmed during selection.
- Order No.: 71185785
- Specification: Intrinsically safe barrier
- Applicable models: Promass 100, CNGmass, LPGmass, LNGmass
Safety Barrier Connection Component (Order No. 71185787)
This connection component is used with the intrinsically safe barrier and includes 2 4-pin connection terminals to ensure reliable signal transmission. It is suitable for the same model series as the safety barrier.
- Order No.: 71185787
- Specification: Safety barrier connection component
- Composition: 2x Connection terminal 4-Pol.
- Applicable models: Promass 100, CNGmass, LPGmass, LNGmass
Electronic Inserts and Main Electronic Modules
Electronic Insert CNG/LNG/LPGmass Exi (Order No. XPD0019-)
This main electronic module is designed specifically for CNG/LNG/LPGmass Exi explosion-proof models and is the core processing unit of the transmitter. When replacing, attention must be paid to explosion-proof certification and software version compatibility.
- Order No.: XPD0019-
- Specification: Electronic insert CNG/LNG/LPGmass Exi
- Type: Main electronic module
- Applicable models: CNGmass, LPGmass, LNGmass (Exi explosion-proof models)
Housings and Seals
Aluminum Cover (Order No. 71185789)
This aluminum cover is made of coated aluminum alloy and comes with an O-ring seal, suitable for various flowmeters. Replacing the cover restores the housing protection rating and prevents dust and moisture ingress.
- Order No.: 71185789
- Specification: Aluminum cover
- Composition: Cover Aluminium, coated; O-Ring 113.90 x 3.53 NBR
- Applicable models: Promass 100, Promag 100, Prosonic Flow E 100/E Heat, CNGmass, LPGmass, LNGmass
Aluminum Housing Sealing Ring (Order No. 71185795)
This sealing ring kit includes cover O-ring and housing/sensor EPDM gasket to ensure housing sealing performance. It is recommended to replace simultaneously when replacing the cover or during maintenance.
- Order No.: 71185795
- Specification: Aluminum housing sealing ring
- Composition: O-Ring 113.90 x 3.53 NBR; Gasket EPDM for housing/sensor
- Applicable models: Promass 100, Prosonic Flow E 100/E Heat, CNGmass, LPGmass, LNGmass
Cable Sealing and Adapters
The following spare parts are used for explosion-proof sealing and thread conversion at cable entries. Each set contains 10 components, suitable for batch maintenance.
| Order No. | Specification | Description |
|---|---|---|
| 50098036 | Explosion-proof cable gland | Kit 10 cable glands M20x1.5 Ex |
| 50098041 | Adapter | Kit 10 extension M20x1.5/G 1/2" |
| 50098042 | Adapter | Kit 10 extension M20x1.5/NPT 1/2" |
Fasteners and Sealing Screws
Clamp Fastening, Screw (Order No. 71276494)
This kit includes cover clamp and M4x16 screw, used for fastening the sensor connection housing. It is applicable to a wide range of models, including Promag/Promass 500, Promag 10, Promag 400/800(C), etc.
- Order No.: 71276494
- Specification: Clamp fastening, screw
- Composition: cover clamp, screw M4x16
- Applicable models: Promass 100, Promag 100, Prosonic Flow E 100/E Heat, CNGmass, LPGmass, LNGmass, Promag/Promass 500, Promag 10, Promag/Promass/Prosonic Flow/t-mass 500 digital, Promag 400/800(C)
Sealing Screw (Order No. 71276495)
This sealing screw kit is used for sealing and fastening the transmitter housing and sensor housing to ensure the protection rating. It is applicable to CNGmass, LPGmass, LNGmass, Prosonic Flow E Heat, and Promag 400(C), etc.
- Order No.: 71276495
- Specification: Sealing screw
- Composition: cover clamp, screw sealing M4x16
- Applicable models: Transmitter housing: CNGmass, LPGmass, LNGmass, Prosonic Flow E Heat; Sensor housing: Promag 400(C)
RFID Tag Spare Parts
Spare RFID TAG (Order No. XPRFID-)
This RFID tag is used for device identification and maintenance records, including RFID TAG, fixing wire, and crimp sleeve. After installation, it enables quick scanning and asset tracking.
- Order No.: XPRFID-
- Specification: Spare RFID TAG
- Composition: RFID TAG, fixing wire, crimp sleeve
Selection and Ordering Notes
- Confirm that the instrument model fully matches the applicable models of the spare parts, especially the explosion-proof type (Exi) and generation index (e.g., C).
- Verify the order number. Some spare parts are kits (e.g., 10-piece sets); order according to actual required quantity.
- When replacing electronic inserts, ensure software version compatibility with the transmitter, and contact manufacturer technical support if necessary.
- Seals are recommended to be replaced regularly to ensure housing protection rating and explosion-proof performance.
For a complete spare parts list or technical parameters, please refer to the official Endress+Hauser documentation or consult an authorized distributor.