CDC90 Analyzer Spare Parts Overview
CDC90 is a key component of industrial analyzers, and its spare parts are numerous. This article compiles a detailed CDC90 spare parts list, including order numbers and specifications, and supplements it with CM44x series modules and accessory information. It aims to help engineering technicians and procurement personnel quickly find and select parts.
CDC90 Spare Parts Detailed List
The table below lists commonly used spare parts for the CDC90 analyzer, including housing, circuit boards, communication modules, valves, pumps, tubing, etc. Please select the appropriate order number according to actual needs.
| Order Number | Specification |
|---|---|
| 71361216 | Kit CDC90 Cover without electronic |
| 71379312 | Kit CDC90 interface Board |
| 71379315 | Kit CDC90 PROFINET cable M12 - RJ45 |
| 71379318 | Kit CDC90 Gateway module Profibus |
| 71379319 | Kit CDC90 Gateway module Profinet |
| 71518246 | Kit CDC90 Gateway EtherNet/IP |
| 71518244 | Kit CDC90 Ethernet cable M12-RJ45 90° |
| 71518248 | Kit CDC90 USB Stick 64 GB |
| 71518249 | Kit CDC90 Cable glands control unit |
| 71361218 | Kit CDC90 air filter |
| 71361219 | Kit CDC90 wall holder V4A |
| 71379320 | Kit CDC90 wall holder steel coated |
| 71361221 | Kit CDC90 valveblock 8 valves |
| 71361222 | Kit CDC90 valveblock 16 valves |
| 71361223 | Kit CDC90 valve module 2x (NC) |
| 71361225 | Kit CDC90 valve modul 2x (NO) |
| 71481481 | Kit CDC90 Valve module 5/2-way |
| 71361230 | Kit CDC90 Pressure monitor pneumatic |
| 71361232 | Kit CDC90 remote IO |
| 71361233 | Kit CDC90 fuse 6A |
| 71361234 | Kit CDC90 power supply |
| 71361237 | Sensor output terminal |
| 71518250 | Kit CDC90 Cable glands pneu control unit |
| 71361240 | Kit CDC90 membrane pump |
| 71361241 | Kit CDC90 canister with pump/fittings |
| 71481484 | Kit CDC90 Level switch |
| 71361242 | Kit CDC90 multihose air 5m |
| 71361244 | Kit CDC90 multihose air 10m |
| 71361247 | Kit CDC90 multihose medium 5m |
| 71361248 | Kit CDC90 multihose medium 10m |
| 71379323 | Kit CDC90 2 channel multihose 5m |
| 71379325 | Kit CDC90 2 channel multihose 10m |
| 71379326 | Kit CDC90 changeover valve PVDF/FKM |
| 71361249 | Kit CDC90 check valves PVDF/FKM |
| 71361254 | Kit CDC90 bracket rinsing bl. assembly |
| 71361264 | Kit CDC90 rinsing block 4x, PVDF/FKM |
| 71481482 | Kit CDC90 Water valve |
| 71361228 | Kit CDC90 fittings |
| 71422095 | Kit CA8x/CDC90 Wall tray reagents :: Wall tray for reagents :: installation outside analyzer/CDC90 :: Material: PP (polypropylene) |
| 71537584 | CDC90 - 3x back pressure valves 2 bar |
| 71390988 | Kit water filter |
| 71390990 | Kit strainer element for water filter |
| 71390993 | Kit pressure reducer with manometer |
| 71110815 | 1G SD card |
| . | |
| 71141336 | Basic module 2x 0/4..20 mA out, alarm relay 2x digital sensor, with connection cable CM444/CM448 |
| 71431302 | Base module BASE2-E CM44: backplane version 2 and min. firmware 01.07.00 needed. CSFxx: backplane version 2 and min. firmware 01.07.03 needed. CA80: backplane version 2, interface module version 2, control module version 2 and min. firmware 01.08.00 needed. |
| 71272410 | Accessory containing only hardware module: upgrade to Modbus TCP or EtherNet via upgrade code (+Webserver) extendable via upgrade code to Modbus TCP or EtherNet/IP CM442/CM444/CM448/CSF48 CM442R/CM444R/CM448R |
| 71155580 | CM444/CM448 power connection cable CM444/CM448 |
| 71135633 | 2-way relay, 2x 0/4..20mA OutCM442 / CM444 / C 4x 0/4..20mA Out CM442 / CM444 / CM448 / CSF48 CM442R / CM444R / CM448R |
| 71135639 | 2-way 0/4..20mA InCM442 / CM444 / CM448 / CS 2x 0/4..20mA In CM442 / CM444 / CM448 / CSF48 CM442R / CM444R / CM448R |
| 71135638 | DIO module 2x digital in, 2x digital out CM442 / CM444 / CM448 / CSF48 CM442R / CM444R / CM448R |
| 71101461 | CM442/CM444/CM448 power distribution terminal CM442/CM444/CM448 |
| 71101763 | CM442/CM444/CM448 base plate CM442/CM444/CM448 |
| 71101734 | Kit CM442: plastic rear housing CM442/CM444/CM448 |
| 71101765 | CM442/CM444/CM448 mechanical internal tube cable with two inner clamps on panel edge Cable mounting rail with double clamps Insert side panels CM442/CM444/CM448 |
| 71101768 | Cable gland M complete kit complete set for field housing CM442/CM444/CM448 |
| 71101770 | Cable gland NPT complete kit complete set for field housing CM442/CM444/CM448 |
| 71101771 | Cable gland G complete kit complete set for field housing CM442/CM444/CM448 |
| 71104942 | CM442 / CM444 / CM448 sealing plugs for 6 cable entries CM442 / CM444 / CM448 |
| 71107452 | Accessory for 1 CM442/CM444/CM448/CSF48/CSP44 base terminal CM442/CM444/CM448/CSF48/CSP44 |
| 71155582 | Accessory for 1 CM442/CM444/CM448/CSF48 4AO terminal module CM442/CM444/CM448/CSF48 |
| 71155583 | 1 set containing 2 AI,485 CM442/CM444/CM448/CSF48 terminal modules CM442/CM444/CM448/CSF48 |
| 71219784 | Accessory for 1 DIO terminal module |
| 71107454 | CM442/CM444/CM448 10 housing cover hinges CM442/CM444/CM448 |
| 71107455 | CM442/CM444/CM448/CSF48 5 end caps and inner covers CM442/CM444/CM448/CSF48 |
| 71107456 | Digital sensor M12 external socket fully assembled CM442 / CM444 / CM448 |
| 71140893 | CM442/CM444/CM448/CSF48CM442R/CM444R/CM4 D-coded, fully assembled CM442/CM444/CM448/CSF48 |
Selection and Ordering Notes
When ordering CDC90 spare parts, please verify the order number and specifications to ensure compatibility with your equipment. Some spare parts may change due to model updates; it is recommended to consult the manufacturer or distributor before ordering.
Communication Module Selection
CDC90 supports various communication protocols, such as PROFIBUS, PROFINET, EtherNet/IP, etc. You can choose the appropriate gateway module according to the on-site network environment. For example, order number 71379318 is a Profibus gateway module, 71379319 is a Profinet gateway module, and 71518246 is an EtherNet/IP gateway module.
Valve and Pump Spare Parts
Valves and pumps are key components of the CDC90, and regular replacement ensures stable operation of the analyzer. Common spare parts include valve blocks, valve modules, diaphragm pumps, changeover valves, etc. For example, 71361221 is an 8-valve block, 71361222 is a 16-valve block, and 71361240 is a diaphragm pump.
Installation Accessories
Installation accessories such as wall mounting brackets, cable glands, sealing plugs, etc., are small but indispensable. Please select appropriate accessories according to on-site installation conditions. For example, 71361219 is a V4A stainless steel wall mounting bracket, and 71379320 is a steel-coated wall mounting bracket.
CM44x Series Modules and Accessories
The CM44x series are transmitter modules commonly used in industrial analyzers, and their accessories and spare parts are equally important. The table below lists related modules and accessories for the CM44x series for selection reference.
Modules and Terminals
- 71141336: Basic module, 2x 0/4..20 mA out, alarm relay, 2x digital sensor, with connection cable, suitable for CM444/CM448.
- 71431302: Base module BASE2-E, requires backplane version 2 and minimum firmware version (CM44: 01.07.00, CSFxx: 01.07.03, CA80: 01.08.00).
- 71272410: Accessory containing only hardware module, can be upgraded to Modbus TCP or EtherNet/IP (+Webserver) via upgrade code, suitable for CM442/CM444/CM448/CSF48, etc.
- 71135633: 2-way relay, 2x 0/4..20mA Out, 4x 0/4..20mA Out, suitable for various models.
- 71135639: 2-way 0/4..20mA In, suitable for various models.
- 71135638: DIO module, 2x digital in, 2x digital out, suitable for various models.
Installation and Connection Accessories
- 71155580: CM444/CM448 power connection cable.
- 71101461: CM442/CM444/CM448 power distribution terminal.
- 71101763: CM442/CM444/CM448 base plate.
- 71101734: Kit CM442 plastic rear housing.
- 71101765: CM442/CM444/CM448 mechanical internal tube cable with two inner clamps on panel edge.
- 71101768: Cable gland M complete kit, suitable for field housing.
- 71101770: Cable gland NPT complete kit.
- 71101771: Cable gland G complete kit.
- 71104942: CM442/CM444/CM448 sealing plugs for 6 cable entries.
- 71107452: Accessory for 1 base terminal, suitable for CM442/CM444/CM448/CSF48/CSP44.
- 71155582: Accessory for 1 4AO terminal module.
- 71155583: 1 set containing 2 AI,485 terminal modules.
- 71219784: Accessory for 1 DIO terminal module.
- 71107454: CM442/CM444/CM448 10 housing cover hinges.
- 71107455: CM442/CM444/CM448/CSF48 5 end caps and inner covers.
- 71107456: Digital sensor M12 external socket, fully assembled.
- 71140893: D-coded, fully assembled, suitable for CM442/CM444/CM448/CSF48.
Summary
This article provides a CDC90 analyzer spare parts list and CM44x series module selection guide, covering order numbers and specifications of commonly used spare parts. Correct selection of spare parts ensures long-term stable operation of the equipment. For more information, please refer to official technical documents or contact the supplier.