FDU95 Ultrasonic Sensor Spare Parts Overview
FDU95 is a commonly used ultrasonic sensor in industrial level measurement, and its installation accessories directly affect measurement stability and service life. This article compiles the original spare parts ordering information for the FDU95 series, including sensor supports and mounting brackets, to help engineering technicians and procurement quickly complete selection and ordering.
All spare parts are made of 316L stainless steel and are suitable for installation with Prosonic S and Mircopilot series transmitters. Please select the appropriate specifications according to the on-site installation distance and sensor type.
Spare Parts Order Numbers and Specifications
The table below lists the order numbers, specifications, materials, and applicable models of commonly used FDU95 spare parts for easy comparison and selection.
| Order Number | Specification | Material | Applicable Models |
|---|---|---|---|
| 71452315 | Sensor support 500mm | 316L | FDU90/FDU91/FDU91F/FDU92/FDU93/FDU95, FMR10, FMR20 |
| 71452316 | Sensor support 1000mm, US-sensor | 316L | FDU90/FDU91/FDU91F/FDU92/FDU93/FDU95, FMR10, FMR20 |
| 71093130 | Mounting bracket | 316L | FDU90/FDU91/FDU91F/FDU92/FDU93/FDU95, FMR10, FMR20, FMU90/FMU95 |
Note: This sensor unit is not repairable. In case of failure, please replace the spare part directly.
Sensor Support Selection Guide
Difference Between 500mm and 1000mm Supports
- 500mm support (71452315): Suitable for working conditions with limited installation space or where the sensor is close to the mounting surface, with strong versatility.
- 1000mm support (71452316): Suitable for installation scenarios requiring a longer extension distance, marked as dedicated for US-sensor.
Both supports are compatible with Prosonic S and Mircopilot transmitters, are made of 316L stainless steel, and have good corrosion resistance.
Application Scenarios for Mounting Bracket (71093130)
The mounting bracket is used to secure the sensor or support structure. It has a wider range of applicable models and is additionally compatible with FMU90/FMU95 transmitters. When wall mounting or flange-assisted fixation is required on site, it is recommended to use this bracket.
Ordering and Usage Precautions
- Confirm the transmitter model: Prosonic S or Mircopilot, both are compatible with the above spare parts.
- Select the support length according to the installation distance: 500mm or 1000mm.
- Check the sensor model: FDU90/FDU91/FDU91F/FDU92/FDU93/FDU95 and FMR10/FMR20 are all applicable.
- If additional fixation is required, please also order the mounting bracket 71093130.
- Note that the sensor unit is not repairable; replace it directly in case of failure.
The above spare parts are all original order numbers. When purchasing, please provide the complete order number to ensure compatibility.