FTW360 Spare Parts List Overview
The FTW360 pump protection sensor is a commonly used measuring device in industrial automation, and its spare parts selection directly affects equipment maintenance efficiency and operational reliability. This article compiles a complete FTW360 spare parts list, covering key components such as aluminum covers, plastic covers, electronic inserts, sensors, and welding adapters.
The table below lists the order numbers, specifications, and applicability of each component, making it convenient for engineering technicians and procurement personnel to quickly consult and select models.
FTW360 Spare Parts Detailed List
The following spare parts are all suitable for the FTW360 pump protection sensor. Please choose the corresponding model according to actual needs.
| No. | Order Number | Part Name | Specification/Material | Remarks |
|---|---|---|---|---|
| 20 | 52002593 | Aluminum Cover | O-ring EPDM | For aluminum housing F6 |
| 20 | 52002594 | Plastic Cover | O-ring VMQ | For polyester housing F10 |
| 30 | 52002590 | Electronic Insert | 21-250VAC/20-200VDC | For FTW360 pump protection sensor |
| 50 | 52002589 | Sensor | G3/4, 316Ti | — |
| — | 210808-1000 | Welding Adapter | G3/4, O-ring 316Ti | Material: 316Ti + O-ring, FKM Viton |
Key Spare Parts Selection Points
Difference Between Aluminum Cover and Plastic Cover
- Aluminum Cover (Order No. 52002593): Equipped with an EPDM O-ring, suitable for aluminum housing F6, with good weather resistance and sealing performance.
- Plastic Cover (Order No. 52002594): Equipped with a VMQ O-ring, suitable for polyester housing F10, with a wider temperature resistance range.
When selecting, confirm the housing material to ensure compatibility and sealing effect.
Electronic Insert and Sensor
- Electronic Insert (Order No. 52002590): Supports 21-250VAC/20-200VDC wide voltage input, compatible with FTW360 pump protection sensor.
- Sensor (Order No. 52002589): Uses G3/4 thread and 316Ti stainless steel material, with strong corrosion resistance.
The electronic insert is the core of signal processing. When replacing, pay attention to voltage matching.
Welding Adapter
Welding Adapter (Order No. 210808-1000) includes G3/4 thread, 316Ti stainless steel, and FKM Viton O-ring, suitable for occasions requiring welded installation. Its material combination ensures reliability under high temperature and corrosive environments.
Spare Parts Replacement Steps
When replacing FTW360 spare parts, please follow the steps below to ensure safety and performance:
- Cut off the power supply and release pipeline pressure.
- Remove the old component according to the spare part type (such as aluminum cover, electronic insert, etc.).
- Check whether the O-ring and thread of the new spare part are intact.
- Install the new spare part and tighten evenly.
- Restore power and perform a functional test.
Note: When replacing the electronic insert, confirm the voltage range to avoid damaging the equipment.
Summary
The FTW360 spare parts list provided in this article covers aluminum covers, plastic covers, electronic inserts, sensors, and welding adapters. Each component lists the order number, specifications, and applicable conditions. Correct selection and replacement of spare parts can effectively extend the service life of the pump protection sensor and reduce downtime.
For more technical information, please refer to the product manual or contact the supplier.