FMR533 Spare Parts List Overview
The FMR533 is an important model in the Micropilot S series radar level transmitter. Its spare parts list covers various key components, such as aluminum covers, terminal modules, and electronic inserts. Based on the original spare parts list, this article compiles complete order numbers, specifications, and applicable models for quick reference by engineering technicians and procurement personnel.
Spare Parts Details and Specifications
The following table lists the main components in the FMR533 spare parts list, including item number, order number, specification description, and applicable models. Please select the appropriate spare parts according to actual needs.
| Item No. | Order Number | Specification | Applicable Models |
|---|---|---|---|
| 25 | 518710-0020 | Cover T3/T12 Alu, coated, gasket; Material: aluminium, coated; O-ring EPDM. | FMR230/FMR231, FMR240/FMR244/FMR245, FMR250, FMR530/FMR531/FMR532/FMR533, FMR540, FMU40/FMU41/FMU42 |
| 20 | 52005936 | Aluminum cover; Material: Aluminium; for operating + display module VU331 and housing F12/T12 | Micropilot M/S, Prosonic M, Levelflex M |
| 11 | 52005643 | Shield; cable compartment, electronics side | Micropilot M/S, Prosonic M, Levelflex M |
| 35 | 52005586 | Terminal module; for housing T12 | — |
| 35 | 71020581 | Terminal module | Micropilot S FMR540 |
| — | 71092209 | O-ring; Usage: cover T12/F12/F23. | — |
| 40 | 52026443 | Display VU331; 4-line alphanumeric display | Micropilot M, Micropilot S, Prosonic M, Levelflex M |
| 30 | XPF0030- | Electronic insert FMR533, Ex, HART, HF Module | — |
Certification Options for Electronic Insert FMR533
The electronic insert FMR533 offers various certification options for different hazardous areas. The following lists optional certification codes and their descriptions. When selecting, please determine according to on-site safety requirements.
- 1: ATEX II 1/2G Ex ia IIC T6 Ga/Gb, XA note safety instruction (XA) (electrostatic charging)!
- 6: ATEX II 1/2G Ex ia IIC T6 Ga/Gb, WHG, XA note safety instruction (XA) (electrostatic charging)!
- A: Non-hazardous area
- D: IECEx Ex ia IIC T6 Ga/Gb
- G: ATEX II 3G Ex nA IIC T6 Gc
- I: NEPSI Ex ia IIC T6
- K: ***TIIS Ex ia IIC T3
- L: ***TIIS Ex ia IIC T6
- S: FM IS Cl.I Div.1 Gr.A-D, zone 0,1,2
- U: CSA IS Cl.I Div.1 Gr.A-D, zone 0,1,2
- Y: Special version, TSP-no. to be spec.
Antenna Selection
Depending on application requirements, the FMR533 can be equipped with different types of antennas. The following are optional antenna codes and descriptions.
- A: 450mm/20", parabolic, no wetted O-ring
- Y: Special version, TSP-no. to be spec.
Weight and Measurement Certification
Some applications may require additional weight and measurement certification. Optional certification codes are as follows:
- A: NMi + PTB
Selection and Ordering Notes
When ordering FMR533 spare parts, please be sure to verify the order number and specifications to ensure compatibility with existing equipment. For key components such as electronic inserts, certification requirements must be clarified. If there are special requirements, you can choose a special version (Y) and provide the TSP number.
- Confirm the equipment model and required spare part name.
- Find the corresponding order number according to the table.
- Verify the specification description and applicable models.
- For electronic inserts, select the correct certification code.
- If in doubt, contact the supplier for the TSP number.