FMR10 Spare Parts List Overview
FMR10 is a commonly used radar level meter in industrial level measurement, and its spare parts selection directly affects installation efficiency and measurement stability. This article compiles a list of commonly used spare parts for the FMR10, including mounting brackets, overflow protection tubes, and sensor supports, with order numbers, descriptions, and recommendation levels. It is suitable for models such as FMR10, FMR20, and the FDU series.
Detailed Spare Parts List
The following spare parts are all marked as Recommendation Level A, indicating preferred selection. All spare parts are currently uncategorized, but can be matched to specific applications based on the description.
Adjustable Mounting Bracket
Order number 71325079, suitable for FDU90, FMR10, and FMR20. This bracket can flexibly adjust the sensor angle to ensure the radar beam is aligned with the measured medium.
- Material: Not specified, usually metal
- Applicable Models: FDU90, FMR10, FMR20
- Recommendation Level: A
Overflow Protection Tube
Order number 71325090, material is metallized PBT-PC, suitable for models with a 40mm/1-1/2" antenna and a front-end process connection of G1-1/2". Applicable models include FMR10 and FMR20.
- Material: Metallized PBT-PC
- Applicable Antenna: 40mm/1-1/2"
- Process Connection: G1-1/2"
- Recommendation Level: A
Sensor Support (500mm)
Order number 71452315, length 500mm, material 316L stainless steel. Used for Prosonic S and Micropilot series installation, applicable models include FDU90/FDU91/FDU91F/FDU92/FDU93/FDU95, FMR10, and FMR20.
- Length: 500mm
- Material: 316L
- Recommendation Level: A
Sensor Support (1000mm)
Order number 71452316, length 1000mm, material 316L stainless steel. Also used for Prosonic S and Micropilot series installation, applicable models are the same as the 500mm version.
- Length: 1000mm
- Material: 316L
- Recommendation Level: A
Spare Parts Parameter Comparison Table
| Order Number | Description | Recommendation Level | Applicable Models |
|---|---|---|---|
| 71325079 | Adjustable Mounting Bracket | A | FDU90, FMR10, FMR20 |
| 71325090 | Overflow Protection Tube (Metallized PBT-PC) | A | FMR10, FMR20 |
| 71452315 | Sensor Support 500mm, 316L | A | FDU90/91/91F/92/93/95, FMR10, FMR20 |
| 71452316 | Sensor Support 1000mm, 316L | A | FDU90/91/91F/92/93/95, FMR10, FMR20 |
Selection and Procurement Recommendations
When purchasing FMR10 spare parts, please choose the appropriate model according to actual installation requirements. For occasions requiring angle adjustment, prioritize the Adjustable Mounting Bracket; if the process connection is G1-1/2" and the antenna is 40mm, an Overflow Protection Tube is required. The length of the sensor support should be selected as either the 500mm or 1000mm version according to the installation space. All spare parts are Recommendation Level A and can be selected with confidence.
Figure: FMR10 spare parts installation diagram (image position is for reference only)