TMT84 Temperature Transmitter Spare Parts Overview
TMT84 is a modular temperature transmitter that supports dual sensor inputs and advanced diagnostic functions. To ensure long-term stable operation of the device, spare parts selection and replacement are crucial. This article compiles the common spare parts order numbers, specifications, and technical parameters for the TMT84, for reference by engineering technicians and procurement.
Spare Parts List
| Order Number | Specification | Description |
|---|---|---|
| 71123339 | Wall mounting bracket | For wall mounting |
| 71123342 | Pipe mounting bracket | For pipe mounting |
| 71086650 | TID10 service cable | CDI interface extension cable, used for remote operation of the TID10 display, length 40 cm |
| 71044061 | Device package | 2x screws, 2x springs, 2x spring washers, 1x sealed CDI connector |
| 71044062 | Device package | 2x screws, 1x sealed CDI connector |
| 71528231 | DIN rail mounting accessory | Clip according to IEC 60715, for temperature transmitter, packaging unit: 2 pieces |
Terminal Heads and Terminal Boxes
- TA30A: Terminal head, for terminal block or transmitter + optional display. Cover: low, hinged, optional window. Material: aluminum, polyester powder-coated. Color: body blue, cover gray. Ambient temperature: -50...150°C. Protection: IP66/68, NEMA 4X.
- TA30D: Terminal head, for 2 transmitters or terminal blocks. Cover: high, hinged. Material: aluminum, polyester powder-coated. Color: body blue, cover gray. Ambient temperature: -50...150°C. Protection: IP66/68, NEMA 4X.
- TA30H: Terminal box, explosion-proof design. Cover: threaded, optional window. Material: aluminum, polyester powder-coated. Color: body blue, cover gray. Ambient temperature: -50...150°C. Protection: IP66/68, NEMA 4X; explosion-proof Ex d/XP: IP66/67.
Other Spare Parts and Accessories
- XPRFID-: Spare RFID tag, includes RFID tag, fixing wire, crimp sleeve.
- XPSPEC-: Spare DIN SPEC tag, note: due to project category group ZTA1, only 1 piece can be ordered per position. Includes tag, fixing wire, crimp sleeve.
- TID10-: Temperature transmitter display, plug and play. Dot matrix measured value display, 12 DIP switches at the bottom. Settings: FF: analog, write protection; PA: bus address, write protection. Compatible with TMT85, TMT84.
TMT84 Modular Temperature Transmitter Technical Parameters
| Parameter | Value |
|---|---|
| Sensor input | Dual sensor input |
| Advanced diagnostics | Sensor monitoring |
| Electrical isolation | 2 kV |
| Application | RTC, TC, Ohm, mV |
| Current consumption | 11 mA |
| Mounting | Head form B, DIN43729 |
| Factory setting | CH1: Pt100, 3-wire, °C; CH2: inactive |
| Optional configuration | Different configurations available |
Selection and Ordering Notes
- Confirm the compatibility of spare parts with the TMT84, such as the TID10 display compatible with TMT85 and TMT84.
- Pay attention to special ordering restrictions, such as XPSPEC- only 1 piece can be ordered per position.
- Select the appropriate protection class and explosion-proof class terminal box according to the installation environment.
- Order accurately according to the order number to avoid incorrect purchases.
Through the spare parts list and parameter descriptions in this article, you can quickly locate the required spare parts and ensure efficient maintenance and operation of the TMT84 temperature transmitter.