TMT82 Temperature Transmitter Spare Parts Overview
TMT82 is a temperature transmitter widely used in industrial sites, and its spare parts system covers multiple categories such as installation, sealing, display, and communication. Based on the original spare parts list, this article organizes order numbers and specifications by function, facilitating engineering maintenance and procurement selection.
All spare parts must be matched according to actual working conditions and transmitter models. It is recommended to verify the order number and compatibility before ordering.
Installation and Fixing Spare Parts
Installation spare parts are used to fix the TMT82 transmitter to rails, walls, or pipes, ensuring stable and reliable on-site installation.
Device Packages and Mounting Brackets
- 71044061 Device package: includes 2x screws, 2x springs, 2x spring washers, 1x sealed CDI connector
- 71044062 Device package: includes 2x screws, 1x sealed CDI connector
- 71123339 Wall mounting bracket
- 71123342 Pipe mounting bracket
- 71409760 Rail socket, suitable for TMT82
- 71528231 Rail mounting accessory: compliant with IEC 60715 standard, for temperature transmitters, packaging unit 2 pieces
Cover Plates and Latches
- 51004490 Blind cover
- 51004948 Front cover latch: includes screws, washers, spring washers
Sealing and Connection Spare Parts
Seals and adapters are used to ensure the transmitter's protection rating in harsh environments, preventing medium leakage and corrosion.
Seals and O-rings
- 71600564 O-ring set 74x3 75° VMQ silicone, packaging unit 5 pieces
- 71182602 Seal set: 5x O-ring 3.69x1.78, 5x O-ring 74.7x2.75
Adapters and Cable Glands
- 51004915 M24X1.5 to M20X1.5 adapter: external M20x1.5/internal M24x1.5, VA material
- 51004653 Cable gland: for 2 sensors
- 51004654 1/2"NPT cable gland: for 2 sensors
- 71525620 Blind plug M20x1.5 EEx-d+O-ring, aluminum
Display and Communication Spare Parts
Display and communication spare parts are used for on-site readings, commissioning, and remote maintenance, improving operational convenience.
Display and Service Cable
- TID10- Temperature transmitter display TID10: plug and play, dot matrix measured value display, 12 DIP switches at the bottom. Settings: FF simulation, write protection; PA bus address, write protection. Compatible with TMT85, TMT84.
- 71086650 TID10 service cable: CDI interface extension cable, for remote operation of the TID10 display, length 40 cm.
Communication Interface
- FXA195- Communication interface FXA195: modem connects HART field devices to a computer via USB, used for device commissioning. Can be connected to intrinsically safe signal circuits, compliant with SIL2, IEC61508.
RFID and Tag Spare Parts
RFID tags and tag spare parts are used for device identification and asset management, facilitating tracking and maintenance.
RFID Tags
- XPRFID- Spare RFID TAG: includes RFID TAG, fixing wire, crimp sleeve. Options AA, BA, IA, MA, NA.
Tag Spare Parts
- XPSPEC- Tag spare part: note that only 1 piece can be ordered per tag (due to project category group ZTA1). Includes TAG, fixing wire, crimp sleeve. Options AA, BA, CA, FA, IA, MA, NA, UA.
Junction Boxes and Housing Accessories
Junction boxes and housing accessories are used to protect the internal circuits of the transmitter and adapt to different explosion-proof and protection requirements.
Terminal Heads and Junction Boxes
| Model | Description | Material/Protection | Applicable Options |
|---|---|---|---|
| TA30A- | Terminal head, for terminal block or head transmitter + optional display, low cover hinge, optional window | Aluminum, polyester powder coating, IP66/68, NEMA 4X, -50...150°C | 7, D, E, 1, 2, Z2 |
| TA30D- | Terminal head, for 2 head transmitters or terminal blocks, high cover hinge | Aluminum, polyester powder coating, IP66/68, NEMA 4X, -50...150°C | 7, D, E, B7, Z2 |
| TA30H- | Junction box, explosion-proof design, screw cover, optional window | Aluminum, polyester powder coating, IP66/68, NEMA 4X, Ex d/XP: IP66/67, -50...150°C | A1, B1, F1, I1, 1, 7, E, F, 1, 2, A, B, NA, NB |
Other Accessories
- 71524431 Foam insert TMT82 dual compartment
- 51004490 Blind cover
- 51004948 Front cover latch
Selection and Ordering Notes
- Confirm transmitter model and spare part compatibility, e.g., TID10 is only compatible with TMT85, TMT84.
- Verify the order number and specifications to avoid incorrect orders.
- Pay attention to packaging units, e.g., O-ring sets are 5 pieces.
- Only 1 piece of tag spare part can be ordered per tag.
- For explosion-proof applications, select junction boxes and accessories with the corresponding protection rating.
Correct spare part selection can effectively shorten downtime. It is recommended to confirm technical details with the supplier.