TH52 Spare Parts List Overview
The TH52 spare parts list is used to guide the selection and procurement of industrial instrument connectors. This list covers configurations such as TU301 ferrule thread connectors, documentation requirements, and additional options. Please note that this unit is not repairable, and specifications must be confirmed at the time of selection.
TU301 Ferrule Threaded Connector Selection
The TU301 series offers a variety of ferrule thread specifications, all made of 316 stainless steel. Depending on the bore diameter and process connection thread, either one-time installation or re-adjustable versions can be selected.
Selection Codes and Specification Parameters
The table below lists all available ordering codes and their corresponding specifications. one time indicates one-time installation, and re-adjust. indicates re-adjustable.
| Ordering Code | Bore Diameter | Process Connection | Material | Type |
|---|---|---|---|---|
| AA | 1/16" | NPT1/8 | 316 | one time |
| AC | 1/16" | NPT1/8 | 316 | re-adjust. |
| BA | 1/8" | NPT1/8 | 316 | one time |
| BB | 1/8" | NPT1/4 | 316 | one time |
| BC | 1/8" | NPT1/8 | 316 | re-adjust. |
| BD | 1/8" | NPT1/4 | 316 | re-adjust. |
| CA | 3/16" | NPT1/8 | 316 | one time |
| CB | 3/16" | NPT1/4 | 316 | one time |
| CC | 3/16" | NPT1/8 | 316 | re-adjust. |
| CD | 3/16" | NPT1/4 | 316 | re-adjust. |
| DA | 1/4" | NPT1/8 | 316 | one time |
| DB | 1/4" | NPT1/4 | 316 | one time |
| DC | 1/4" | NPT1/8 | 316 | re-adjust. |
| DD | 1/4" | NPT1/4 | 316 | re-adjust. |
| YY | Special version, TSP number required | |||
Selection Steps
- Select the corresponding code (AA to DD) based on the pipe bore diameter.
- Confirm the process connection thread is NPT1/8 or NPT1/4.
- Choose one time or re-adjust. based on installation requirements.
- For special versions, select YY and provide the TSP number.
Documentation Requirements and Version
The standard documentation requirement code is 1, and the version is K. If there are no special requirements, keep the default.
- Documentation Requirement: 1 indicates standard documentation.
- Version: K indicates standard version.
Additional Options
The additional option code 1 indicates that no additional functions are selected. For other options, please refer to the complete selection manual.
- Additional Option: 1 = Not selected.
Frequently Asked Questions
Is the TH52 spare part repairable?
This unit is not repairable and must be replaced entirely if damaged. Please be sure to confirm specifications during selection.
How to choose between one-time or re-adjustable versions?
If no further adjustment is needed after installation, choose one time; if subsequent fine-tuning is required, choose re-adjust..