TC65 Spare Parts List Overview

TC65 is a commonly used device in industrial temperature measurement, and its spare parts list covers key components such as mounting accessories, temperature transmitters, displays, configuration tools, and junction boxes. Based on the original spare parts list, this article is organized into a structured technical document for easy reference by engineering technicians and procurement personnel.

The following content is divided into sections by component category, including order numbers, specifications, technical parameters, and applicable models, while retaining the original image tags.

Mounting Accessories and Seals

Device Package (Order No.: 71044061)

  • 2x screws
  • 2x springs
  • 2x spring rings
  • 1x sealing CDI-connector

This device package is suitable for the installation and sealing of TC65, ensuring reliable connection.

O-ring Set (Order No.: 71600564)

  • Specification: O-ring 74x3 75° VMQ Silicon
  • Packaging unit: 5 pieces/pack

VMQ silicone material has excellent temperature resistance and sealing performance, suitable for the sealing requirements of temperature transmitters.

Compression Fitting TA50 (Model: TA50-)

Mounting part compression fitting TA50, with Screw in mounting method, suitable for connecting temperature sensors.

Module Temperature Transmitters

TMT82 Module Temperature Transmitter

TMT82 is a two-wire temperature transmitter with dual universal sensor input and 2kV electrical isolation (input/output). Suitable for RTD, TC, Ohm, and mV signals.

  • High reliability: with drift detection and sensor backup
  • Optional SIL 2/3 safety certification (compliant with IEC61508)

Optional configuration codes: AA, B2, B4, GA, GD, GR, IA, NA, NN, TC, A, 1, 2, A, D1, D2, TJ, TK, etc.

TMT84 Module Temperature Transmitter

TMT84 features dual sensor input and advanced diagnostic functions (sensor monitoring), 2kV electrical isolation. Suitable for RTC, TC, Ohm, mV signals, current consumption 11 mA.

  • Mounting type: Type B head, DIN43729
  • Factory setting: CH1: Pt100, 3-wire, oC; CH2: inactive
  • Other configurations customizable

Optional configuration codes: A1, B1, B2, B4, D1, D3, E1, GA, GD, GR, A, 1, 2, A, D1, D2, F1, etc.

TMT85 Module Temperature Transmitter

TMT85 supports FOUNDATION Fieldbus protocol (ITK 5.0), dual sensor input and advanced diagnostics, 2kV electrical isolation (sensor input to output). Suitable for RTC, TC, Ohm, mV signals, current consumption 11 mA.

  • Mounting type: Type B head, DIN43729
  • Certification: UL listed, CSA General Purpose

Optional configuration codes: A1, B1, B2, D1, D3, E1, GA, GD, GR, A, 1, 2, A, D1, D2, F1, etc.

Display and Configuration Tools

Temperature Transmitter Display TID10

TID10 can be directly plugged onto the transmitter, featuring a dot matrix measured value display, with 12 DIP switches at the bottom for settings.

  • FF settings: simulation, write protection
  • PA settings: bus address, write protection
  • Compatible models: TMT85, TMT84

Optional configuration codes: A1, B1, B2, B4, D1, E1, GA, GR.

Readwin 2000 Configuration Package (READWIN-)

Readwin 2000 operating and reading software for instrument configuration and parameter setting.

Instrument Configuration Package TXU10 (TXU10-)

For devices that can be programmed and configured via PC, including program settings and USB interface cable.

Communication Interface FXA195 (FXA195-)

FXA195 is a HART modem that can connect HART field devices to a computer via USB, for configuration with software tools.

  • Can be connected to intrinsically safe signal loops
  • SIL2 certified, compliant with IEC61508

Optional configuration codes: G, 1, D.

Junction Boxes and Accessories

Junction Box TA30H (TA30H-)

TA30H is used to hold terminal blocks or head-mounted transmitters, with optional display. Designed as explosion-proof, with screw-fixed cover, optional window.

  • Material: aluminum
  • Coating: polyester powder coating
  • Color: body blue, cover gray
  • Ambient temperature: -50~150 oC (housing)
  • Protection class: IP66/68, NEMA 4X (housing)
  • Explosion-proof Ex d/XP protection: IP66/67 (housing)

Optional configuration codes: A1, B1, I1, 1, 2, A, B, C, D, E, F, G, Y, 1, 2.

Washer (Order No.: 60011599)

  • Size: D=6.1mm
  • Material: AISI316 stainless steel
  • Packaging: 10 washers per set

Suitable for sealing and fastening applications.

Selection and Ordering Information

All the above spare parts are provided with order numbers and optional configuration codes, and users can choose according to actual needs. It is recommended to specify the model, configuration code, and quantity when ordering to ensure compatibility.

For more detailed technical information, please refer to the relevant product manuals or contact the supplier.