TC62 Spare Parts List Overview

The TC62 series is a commonly used device in industrial temperature measurement, and its spare parts and selection directly affect system stability. This article compiles the TC62 spare parts list, covering key components such as heat transfer oil, ceramic terminal blocks, thermocouple inserts, and various temperature transmitters. The content is aimed at engineering technicians and procurement personnel, providing order numbers, specifications, and selection recommendations.

Common Spare Parts and Consumables

Heat Transfer Oil and Equipment Package

  • 71249291: Heat transfer oil FDA certified 30g, suitable for food and pharmaceutical industries.
  • 71312729: Heat transfer oil HSC 340, 100g, high-temperature heat transfer medium.
  • 71044061: Equipment package, includes 2x screws, 2x springs, 2x spring rings, 1x sealing CDI-connector.

Ceramic Terminal Blocks

  • 71111510: Ceramic terminal block, high-temperature insulation.
  • 71111514: Ceramic terminal block, suitable for high-reliability scenarios.

Thermocouple Inserts

TPC100 Thermocouple Insert

TPC100 uses a replaceable plug-in design (MgO), suitable for the TC6x series. Order numbers start with TPC100-; the specific model must be selected according to the graduation and length.

TPC300 Thermocouple Insert

TPC300 is also a replaceable plug-in type (MgO), designed specifically for the TC6x series. Order numbers start with TPC300-; when selecting, confirm the graduation and insertion depth.

Temperature Transmitter Selection

TMT84 Modular Temperature Transmitter

  • Dual sensor input, supports RTD, TC, Ohm, mV signals.
  • Advanced diagnostics: sensor monitoring.
  • Galvanic isolation 2kV.
  • Current consumption: 11 mA.
  • Mounting: Type B head, DIN43729.
  • Factory setting: CH1: Pt100, 3-wire, °C; CH2: inactive.
  • Different configurations available.

TMT85 Modular Temperature Transmitter

  • Dual sensor input, advanced diagnostics.
  • FOUNDATION Fieldbus protocol (ITK 5.0).
  • Galvanic isolation 2kV (sensor input to output).
  • Application: RTC, TC, Ohm, mV.
  • Current consumption: 11 mA.
  • Mounting: Type B head, DIN43729.
  • UL listed, CSA General Purpose.

TMT82 Modular Temperature Transmitter

  • Two-wire temperature transmitter.
  • Dual universal sensor input.
  • Galvanic isolation 2kV (input/output).
  • Application: RTD, TC, Ohm, mV.
  • Preset fault current high.
  • Drift detection and sensor backup, high reliability.
  • Optional SIL 2/3 (IEC61508) safety applications.

Display and Commissioning Tools

TID10 Temperature Transmitter Display

  • Plug and play, dot matrix measured value display.
  • 12 DIP switches at the bottom.
  • Settings: FF: Simulation, Write Lock; PA: Bus address, Write Lock.
  • Compatible with: TMT85, TMT84.

Commissioning Software and Interfaces

  • READWIN-: Readwin 2000 commissioning package, operation + reading software.
  • TXU10-: Instrument commissioning package, used for PC programming and commissioning, includes USB cable.
  • FXA195-: Communication interface, HART modem, USB connection to computer, supports SIL2 (IEC61508), can connect to intrinsically safe signal loops.

Junction Box

TA30H Junction Box

  • Used to install terminal blocks or head-mounted transmitters, optional display.
  • Design: explosion-proof.
  • Cover: threaded, optional window.
  • Material: aluminum, polyester powder coating.
  • Color: body blue, cover gray.
  • Ambient temperature: -50~150°C (housing).
  • Protection: IP66/68, NEMA 4X (housing); explosion-proof Ex d/XP: IP66/67 (housing).

Selection and Ordering Notes

  1. Confirm the thermocouple graduation and insertion depth, and select the complete model of TPC100 or TPC300.
  2. Select TMT84, TMT85, or TMT82 according to the communication protocol (HART/FF/PA).
  3. When display is required, choose TID10 and note compatibility with the transmitter.
  4. For explosion-proof occasions, use the TA30H junction box and confirm the protection rating.
  5. For commissioning tools, choose TXU10 or FXA195 according to the PC interface.

The above spare parts and transmitters must be purchased by complete order number. For specific configurations, consult the supplier.