TAF11 Spare Parts List Overview
The TAF11 spare parts list covers commonly used installation accessories, seals, temperature transmitters, and commissioning tools in temperature measurement systems. This list is compiled based on original ordering data, aiming to help engineering technicians and procurement personnel quickly identify and select parts. All spare parts are suitable for industrial temperature measurement applications, and some models support high-temperature and high-pressure environments.
Installation Accessories
Oval Flange
The oval flange is used for the process connection of temperature sensors, with a maximum temperature of up to 400°C, complying with DIN 43734 standard. The material is cast iron, and mating flanges and gaskets are not provided.
| Order Number | Specification | Dimensions | Material | Max Temperature |
|---|---|---|---|---|
| 60000516 | Oval Flange | A=23mm, C=90mm, B=70mm | Cast Iron | 400°C |
| 60000517 | Oval Flange | A=33mm, C=90mm, B=70mm | Cast Iron | 400°C |
Compression Fitting
The compression fitting is used for the sealed connection of temperature sensors, with a maximum temperature of 350°C and a maximum pressure of 1 bar. The material is stainless steel, and various thread sizes are available.
| Order Number | Specification | Dimensions | Material | Max Temperature | Max Pressure |
|---|---|---|---|---|---|
| 60020836 | Compression Fitting | A=G 3/4", d=22mm, Wr=41 | Stainless Steel | 350°C | 1 bar |
| 60021425 | Compression Fitting | A=G1"1/2, d=22mm, Wr=55 | Stainless Steel | 350°C | 1 bar |
| 60021757 | Compression Fitting | A=G1", d=22mm, Wr=41 | Stainless Steel | 350°C | 1 bar |
| 60022497 | Compression Fitting | A=G 1"1/2, d=34mm, Wr=55 | Stainless Steel | 350°C | 1 bar |
Seals and Device Packages
Seals are used to ensure the sealing performance of process connections, and device packages provide the fasteners and connectors required for installation.
- Order Number 71182602: Seal kit, including 5 O-rings 3.69x1.78 and 5 O-rings 74.7x2.75.
- Order Number 71044061: Device package, including 2 screws, 2 springs, 2 spring washers, and 1 sealed CDI connector.
Temperature Transmitters
Modular Temperature Transmitter TMT84
TMT84 is a dual-sensor input modular temperature transmitter with advanced sensor monitoring and diagnostics functions. Electrical isolation 2kV, suitable for RTD, TC, resistance, and mV signals. Current consumption 11 mA, mounting form B-type head, DIN43729. Factory settings: CH1 is Pt100 three-wire, unit °C; CH2 is inactive. Custom configurations are available.
Modular Temperature Transmitter TMT85
TMT85 supports FOUNDATION Fieldbus protocol (ITK 5.0), dual-sensor input, with advanced diagnostics functions. Electrical isolation 2kV, suitable for RTD, TC, resistance, and mV. Current consumption 11 mA, mounting form B-type head, DIN43729. Certified by UL, CSA general purpose.
Temperature Transmitter TMT71
TMT71 is a two-wire temperature transmitter with a single universal sensor input, electrical isolation 2kV. Suitable for RTD, TC, resistance, and mV. Factory default setting: Pt100 four-wire, range 0...+100°C. Rich optional configuration codes.
Temperature Transmitter TMT72
TMT72 is a two-wire temperature transmitter with a single universal sensor input, electrical isolation 2kV. Suitable for RTD, TC, resistance, and mV. Factory default setting: Pt100 four-wire, range 0...+100°C. Rich optional configuration codes.
Modular Temperature Transmitter TMT82
TMT82 is a two-wire modular temperature transmitter with dual universal sensor inputs, electrical isolation 2kV. Suitable for RTD, TC, resistance, and mV. Features drift detection and sensor backup for high reliability. Optional SIL 2/3 certification, suitable for safety-critical applications.
Commissioning Tools and Interfaces
Communication Interface FXA195
FXA195 is a USB HART modem used to connect HART field devices to a computer. Field device commissioning can be performed via software tools. Can be connected to intrinsically safe signal loops, compliant with SIL2, IEC61508.
Instrument Commissioning Package TXU10
TXU10 commissioning package is used for devices that can be programmed and commissioned via PC, including program settings and USB interface cable.
Readwin 2000 Commissioning Package
Readwin 2000 commissioning package includes operating and reading software for device commissioning.
Thermocouple Sheath TPC100
TPC100 thermocouple sheath adopts a replaceable plug-in design (MgO insulation), suitable for high-temperature measurement. Model codes include various options and can be configured according to requirements.
Selection Notes
- Confirm process connection dimensions and thread specifications to ensure matching with on-site interfaces.
- Select accessories with appropriate materials based on ambient temperature and pressure.
- Transmitters should be selected based on signal type, communication protocol, and safety requirements.
- Commissioning tools must be compatible with the software and field devices used.