TR24 Spare Parts List Overview
The TR24 series spare parts list provides information on key components required for maintenance and replacement, including order numbers, specification descriptions, etc. The following content is organized by component type for quick reference by engineering technical personnel.
Gaskets and Seals
- 52028179: Profile gasket for cover, suitable for stainless steel housing F15.
- 60011599: Gasket, D=6.1mm, AISI316 material, 10 pieces per set.
- 60011600: Gasket, D=6.1mm, PTFE material, 10 pieces per set.
- 71586353: Spare parts kit gasket ring D21/d6 Viton, 3 pieces per pack.
- 71586366: Spare parts kit gasket ring D21/d6 Neop., 3 pieces per pack.
- 71586370: Spare parts kit gasket ring D21/d3 Viton, 3 pieces per pack.
- 71586372: Spare parts kit gasket ring D21/d3 Neop., 3 pieces per pack.
- 71367427: Washer, 10 pieces per pack.
Display and Connection Components
- 60017971: Display, Display LC for TA20J.
- 71313382: Connector.
- 71044061: Device package, includes 2x screws, 2x springs, 2x spring rings, 1x sealing CDI-connector.
- 71043745: Atmospheric compensation filter port, composed of filter plug plastic, Pressure compensation filter, O-ring, for housing F15, non-explosion-proof.
Ceramic Terminal Blocks
- 71111513: Ceramic terminal block.
- 71111514: Ceramic terminal block.
- 71111515: Ceramic terminal block.
Other Spare Parts
- 71586415: Spare parts kit O-ring TA20R, 44.17x1.78 EPDM labs free, black, 5 pieces per pack.
- TPR100-: RTD insert TPR100, Mineral insulated cable (MgO), Replaceable insert acc.EN60751, maximum measuring range -200...600°C (depending on configuration).
Temperature Transmitter Selection Guide
Temperature transmitters are core instruments in industrial process control. The following introduces the technical parameters and application scenarios of TMT series modular temperature transmitters.
TMT84 Modular Temperature Transmitter
- Dual sensor input, advanced diagnostics: sensor monitoring.
- Electrical isolation 2kV.
- Application: RTC, TC, Ohm, mV.
- Current consumption: 11 mA.
- Installation: head form B, DIN43729.
- Factory setting: CH1: Pt100, 3-wire, °C; CH2: inactive.
- Different configurations available.
TMT85 Modular Temperature Transmitter
- Dual sensor input and advanced diagnostics for sensor monitoring.
- FOUNDATION Fieldbus protocol (ITK 5.0).
- Electrical isolation 2kV (sensor input to output).
- Application: RTC, TC, Ohm, mV.
- Current consumption: 11 mA.
- Installation: head form B, DIN43729.
- UL listed, CSA General Purpose.
TID10 Temperature Transmitter Display
- Plug and play.
- Dot matrix measured value display.
- 12 DIP switches at the bottom.
- Settings: FF: Simulation, Write Lock; PA: Bus address, Write Lock.
- Compatible with: TMT85, TMT84.
Other Temperature Transmitter Models
- TMT180: PC programmable, application RTD, 2-wire 4-20mA, fault response NAMUR NE 43, installation head form B, DIN EN50446, UL listed.
- TMT181: To be discontinued, PC programmable, application RTD, TC, Ohm, mV, 2-wire 4-20mA, electrical isolation, fault response NAMUR NE 43, installation head form B, DIN EN50446, UL listed.
- TMT182: HART protocol, application RTD, TC, Ohm, mV, 2-wire 4-20mA, SIL2, electrical isolation, fault response NAMUR NE 43, installation head form B, DIN43729, UL listed, GL Marine.
- TMT82: 2-wire temperature transmitter, dual universal sensor input, electrical isolation 2kV, application RTD, TC, Ohm, mV, with drift detection and sensor backup, optional SIL 2/3 (IEC61508).
Terminal Boxes and Accessories
Terminal boxes are used to install measurement inserts and transmitters, providing protection and connection.
Terminal Box Model Comparison
| Model | Material | Ambient Temperature | Protection Class | Features |
|---|---|---|---|---|
| TA20A | Aluminum epoxy resin coating | Max +100°C; ATEX +95°C | - | To be discontinued, limited supply |
| TA20B | Polyamide black | Max +80°C | IP65 | - |
| TA21E | Aluminum | Max +100°C; ATEX +95°C | IP65 | Cover can be tightened |
| TA30A | Aluminum, polyester powder coating | -50...150°C | IP66/68, NEMA 4X | Low cover, hinge, optional window |
| TA30D | Aluminum, polyester powder coating | -50...150°C | IP66/68, NEMA 4X | High cover, hinge |
| TA30P | Polyamide PA12 antistatic | -40...120°C | IP65 | High cover, hinge |
Commissioning and Communication Accessories
- READWIN-: Readwin 2000 commissioning package, operation and reading software.
- TXU10-: Instrument commissioning package, for PC programmable devices, program settings + USB cable.
- FXA195-: Communication interface, Modem for connecting HART field devices to computer (USB), SIL2, IEC61508.
Mounting Parts
- TA50-: Mounting part compression fitting TA50, Screw in.
Summary
This article details the TR24 spare parts list and the technical parameters of TMT series temperature transmitters, covering key components such as gaskets, displays, and terminal boxes. Correct selection and maintenance of these components are crucial for ensuring the reliable operation of industrial measurement systems. For more information, please refer to the relevant product manuals.