TST310 Spare Parts List Overview
TST310 is an industrial instrument, and its spare parts mainly include gaskets and TA50 mounting kits. This unit is not repairable, so spare parts replacement is key to maintenance.
This table provides detailed order numbers and specifications to facilitate accurate selection by engineering technicians and procurement personnel.
Gasket Spare Parts
Gaskets are common spare parts for the TST310. The following lists each order number and its specifications.
All gasket sets contain 10 gaskets. See the table below for specific materials and dimensions.
| Order Number | Specification | Material/Dimensions |
|---|---|---|
| 60011575 | Gasket | Standard |
| 60011598 | Gasket | Standard |
| 60011599 | Gasket | D=6.1mm, AISI316 |
| 60011600 | Gasket | D=6.1mm, PTFE |
Note: Each order number corresponds to a set containing 10 gaskets. When purchasing, please select according to material and dimension requirements.
TA50 Mounting Kit Selection
The TA50 mounting kit is used for installing the TST310 and uses a threaded connection.
When selecting, consider three parameters: diameter, connection thread, and sleeve material.
The following are available codes and corresponding parameters for quick selection.
Mounting Kit Parameter Code Table
| Code | Diameter | Connection | Sleeve Material |
|---|---|---|---|
| AC | 3mm | G1/2 | 316 |
| AD | 3mm | G1/2 | PTFE |
| BB | 6mm | NPT1/4 | 316 |
| CB | 6mm | NPT1/2 | 316 |
| FB | 3mm | G1/4 | 316 |
| FP | 3mm | G1/4 | PTFE |
| GB | 6mm | G1/4 | 316 |
| GP | 6mm | G1/4 | PTFE |
| HB | 6mm | G1/2 | 316 |
| HP | 6mm | G1/2 | PTFE |
| QB | 3mm | G1/8 | 316 |
| QP | 3mm | G1/8 | PTFE |
| YY | Special version | TSP number required | - |
For special versions (code YY), a TSP number must be specified. Please consult the supplier for details.
Selection Recommendations
Select appropriate gaskets and mounting kits according to actual working conditions.
- If the medium is highly corrosive, it is recommended to use PTFE material gaskets or sleeves.
- If higher mechanical strength is required, AISI316 stainless steel is recommended.
- Confirm that the connection thread specification (G or NPT) matches the equipment interface.
- The diameter parameter must match the pipe or probe size.
Correct selection ensures sealing performance and installation reliability, extending equipment service life.