OUSAF22 Spare Parts Overview
The OUSAF22 series spare parts are key components in industrial analytical instruments, mainly used for light source systems and protective connections. Correct selection of spare parts ensures long-term stable operation of the instrument.
This article compiles the official spare parts list, including order numbers and specifications, for quick reference by engineering technicians and procurement personnel.
Spare Parts List and Specifications
The table below lists commonly used spare parts for the OUSAF22 series, including high-energy cold light lamps, inflatable lamps, and dust cover connectors.
| No. | Order Number | Specification |
|---|---|---|
| 1 | 71142977 | OUSAFxx High-Energy Cold Light Lamp |
| 2 | 71142978 | OUSAFxx Inflatable Lamp |
| 3 | 71210161 | OUSxFxx Dust Cover Connector |
Key Spare Parts Description
High-Energy Cold Light Lamp (71142977)
The high-energy cold light lamp is the core light source of the OUSAFxx series, providing high-intensity cold light output, suitable for high-precision analysis scenarios.
Its long lifespan and low heat generation characteristics reduce maintenance frequency and improve instrument reliability.
Inflatable Lamp (71142978)
The inflatable lamp is suitable for specific spectral analysis, filled with inert gas internally to ensure stable discharge and spectral purity.
This spare part complements the high-energy cold light lamp, and users can choose according to actual measurement needs.
Dust Cover Connector (71210161)
The dust cover connector is used for the OUSxFxx series, connecting the dust cover to the instrument body to prevent dust from entering optical components.
Regular inspection and replacement of the connector can avoid measurement errors caused by contamination.
Selection and Procurement Recommendations
- Confirm instrument model: OUSAFxx and OUSxFxx correspond to different spare parts; please check the nameplate.
- Prefer original spare parts: ensure compatibility and consistent performance.
- Pay attention to order numbers: directly using the order numbers in this article can reduce communication costs.
- Recommend stocking consumable parts: such as dust cover connectors, it is recommended to keep 1-2 on hand.
Maintenance and Replacement Steps
- Turn off the instrument power and wait for the light source to cool.
- Open the instrument housing and locate the light source or connector position.
- Record the original spare part order number and verify the new spare part.
- Remove the old spare part, install the new spare part and tighten.
- Power on and test to confirm the light source is normal and no alarms.
Following the above steps ensures safe replacement and restoration of instrument performance.