Teqwave MW 300/500 Solids Content Flowmeter Spare Parts List

This document provides a spare parts list for the Endress+Hauser Teqwave MW 300/500 solids content flowmeter, including power supply assemblies, ISEM modules, I/O modules, display modules, terminal assemblies, cover assemblies, and other key components. All spare parts are listed with order numbers and specifications for quick reference and ordering by engineering and procurement personnel.

Power Supply Assembly

  • Order number: 71323009
  • Specification: Power supply assembly
  • Application: Promag/Promass/Prosonic Flow/t-mass/Teqwave MW 300/500 digital, Non-haz, Zone 2, transmitter housing, electronics compartment

ISEM Module

  • Order number: XPD0095-
  • Specification: ISEM, Teqwave MW 300/500 digital
  • Application: For applications compliant with approval 010
  • Composition: ISEM (sensor electronics module) V314-00

T-DAT Module

  • Order number: 71185788
  • Specification: T-DAT module

I/O Module

  • Order number: XPD0037-
  • Specification: I/O module
  • Application: Proline 300/500
  • Order number: XPD0038-
  • Specification: I/O module
  • Application: Proline 300/500

Module Box

  • Order number: 71323011
  • Specification: Module box, 300, Non-haz
  • Application: Transmitter housing, electronics compartment
  • Composition: Module box (including interconnect board)

Ribbon Cable Assembly

  • Order number: 71323005
  • Specification: Ribbon cable assembly
  • Application: Promag/Promass 300/500, t-mass/Teqwave MW 300, transmitter housing

Display Module

  • Order number: XPD0031-
  • Specification: Display module
  • Application: Proline 300/500, DKX001

Terminal Assembly

  • Order number: 71323073
  • Specification: Terminal assembly
  • Application: Transmitter housing Alu/hygienic, connection compartment
  • Option A: HART, PROFIBUS PA, FOUNDATION Fieldbus
  • Composition: 1x terminal 2-pin, 1x terminal 3-pin, 1x terminal 4-pin
  • Order number: 71327818
  • Specification: Terminal assembly
  • Application: Transmitter housing Alu/hygienic, connection compartment
  • Option C: PROFIBUS DP, Modbus RS485
  • Composition: 1x terminal 2-pin, 1x terminal 3-pin, 1x terminal 4-pin
  • Order number: 71323079
  • Specification: Terminal assembly
  • Application: Transmitter housing Alu/cast, connection compartment, with remote display DKX001
  • Composition: 1x terminal 4-pin

Cover Assembly

  • Order number: 71323016
  • Specification: Cover assembly
  • Application: Promag/Promass/Prosonic Flow/t-mass/Teqwave MW 300, Prosonic Flow 500, transmitter housing Alu, Non-haz; Promag/Promass 300, Promag/Promass/Prosonic Flow 500, transmitter housing Alu, Ex
  • Composition: Window cover Alu, O-ring 110.7x3.53 HNBR
  • Order number: 71323018
  • Specification: Cover assembly
  • Application: Promag/Promass/Prosonic Flow/t-mass/Teqwave MW 300, transmitter housing Alu, Non-haz; Promag/Promass/Prosonic Flow/t-mass 300, transmitter housing Alu, Ex
  • Composition: Cover Alu, O-ring 110.7x3.53 HNBR
  • Order number: 71323026
  • Specification: Cover assembly
  • Application: Promag/Promass/Prosonic Flow/t-mass/Teqwave MW 300, Promag/Promass/Prosonic Flow 500, transmitter housing Alu/cast
  • Composition: 10x O-ring 110.7x3.53 HNBR
  • Order number: 71323028
  • Specification: Cover assembly
  • Application: Promag/Promass/Prosonic Flow/t-mass/Teqwave MW 300, Prosonic Flow 500, transmitter housing Alu, Non-haz
  • Composition: Cover Alu, O-ring 117.1x3.53 HNBR
  • Order number: 71323030
  • Specification: Cover assembly
  • Application: Promag/Promass/Prosonic Flow/t-mass/Teqwave MW 300, Prosonic Flow 500, transmitter housing Alu, Non-haz
  • Composition: 10x O-ring 117.1x3.53 HNBR
  • Order number: 71323044
  • Specification: Cover assembly
  • Application: Remote display DKX001, housing Alu
  • Composition: Cover Alu, O-ring 88.50x3.53 HNBR
  • Order number: 71323048
  • Specification: Cover assembly
  • Application: Remote display DKX001, housing Alu/cast
  • Composition: 10x O-ring 88.50x3.53 HNBR

Interface Seal Assembly

  • Order number: 71323071
  • Specification: Interface seal assembly
  • Application: Promass/Prosonic Flow/t-mass/Teqwave MW 300, Promass/Prosonic Flow 500, transmitter housing/sensor or transmitter housing/wall mounting
  • Composition: 5x O-ring 88.50x3.53 HNBR (for interface)

Protective Shell

  • Order number: 71368488
  • Specification: Protective shell
  • Application: Transmitter housing Alu/hygienic, connection compartment
  • Option A: HART, PROFIBUS PA, PROFIBUS DP, Modbus RS485, FOUNDATION Fieldbus
  • Composition: Connection compartment cover, display carrier, 2x screws M4x10

Adapter

  • Order number: 71450720
  • Specification: Adapter M12, RJ45, L=175mm (for t-mass F 300, I)
  • Application: Proline 300/500

Weather Protection Cover Assembly

  • Order number: 71343505
  • Specification: Weather protection cover assembly
  • Application: Promag/Promass/Prosonic Flow/t-mass/Teqwave MW 300, Promag/Promass/Prosonic Flow 500, transmitter housing
  • Composition: Weather protection cover 4404, mounting material

Wireless Receiver

  • Order number: 71351317
  • Specification: Wireless receiver for extended distance
  • Composition: Connection cable in transmitter, antenna Ex cable entry, 1.5m cable, antenna, elbow with union

Transmitter Teqwave MW 300

  • Order number: 4X3BXX-
  • Specification: Transmitter Teqwave MW 300, 4X3BXX
  • Features: Integrated web server

Mounting Kit

  • Order number: DK4M-
  • Specification: Mounting set, Teqwave MW
  • Composition: Threaded bolts/screws, nuts, washers, and a pair of NBR flange seals (with aramid fiber)
  • Note: Can be ordered separately as a replacement for PE

Remote Display DKX001

  • Order number: DKX001-
  • Specification: Remote display DKX001
  • Description: Remote display and operation module for Proline 300, providing greater installation flexibility and better readability
  • Delivery: Depends on the selection in the individual product structure

Remote Display Connection Cable

  • Order number: DKX002-
  • Specification: Remote display connection cable
  • Description: Connection cable for remote display DKX001 for Proline 300

Spare RFID TAG

  • Order number: XPRFID-
  • Specification: Spare RFID TAG
  • Composition: RFID TAG, fixing wire, crimp sleeve

Notes on Spare Parts Selection

  • Please select the corresponding spare parts according to the transmitter model, housing material, and approval area (Non-haz/Ex).
  • Some spare parts include multiple sub-components; please verify the composition list.
  • Order numbers may vary depending on the product structure; it is recommended to consult the manufacturer or distributor before ordering.
  • For remote display DKX001, the connection cable DKX002- must be ordered as well.

The above spare parts list covers the main maintenance components of the Teqwave MW 300/500 solids content flowmeter. Correct selection ensures long-term stable operation of the equipment. For more information, please refer to the product manual or contact technical support.