FMR60B Chinese Manual Download
You can directly download the FMR60B Chinese manual to obtain complete product technical information, installation guide, and operating instructions.
Download FMR60B Chinese Manual.pdf
Product Overview
FMR60B is a high-performance radar level transmitter suitable for industrial process measurement. It uses a non-contact measurement principle and can be widely used for level detection of liquids, slurries, and granular solids.
Main Features
- High-precision measurement: Measurement accuracy up to ±3 mm, meeting the requirements of demanding working conditions.
- Wide range: Maximum range 30 m, suitable for various tank sizes.
- Multiple output signals: Supports 4-20mA HART, PROFIBUS PA, FOUNDATION Fieldbus, etc.
- Rugged protection: IP67/IP68 protection rating, suitable for outdoor and harsh environments.
Technical Parameters
The following are the core technical parameters of FMR60B for selection reference.
| Parameter | Specification |
|---|---|
| Measurement principle | Frequency Modulated Continuous Wave (FMCW) radar |
| Measurement range | 0 ~ 30 m |
| Accuracy | ±3 mm |
| Process connection | Thread, flange (optional) |
| Process temperature | -40 ~ +200°C |
| Process pressure | -1 ~ +40 bar |
| Output signal | 4-20mA HART / PROFIBUS PA / FF |
| Protection rating | IP67 / IP68 |
Installation Steps
To ensure measurement accuracy, please install the FMR60B according to the following steps.
- Select installation location: Avoid interference sources such as feed inlets and agitators, and ensure the antenna is perpendicular to the surface of the measured medium.
- Fix the instrument: According to the process connection type, use threads or flanges to securely install the instrument on the tank top.
- Electrical connection: Connect the power supply and signal cables according to the wiring diagram in the manual, and pay attention to grounding the shielding layer.
- Parameter setting: Set parameters such as range and medium characteristics through a HART communicator or commissioning software.
- Verify measurement: Check the echo curve to confirm that the measured value is stable and accurate.
Selection Precautions
During selection, working conditions and instrument specifications must be comprehensively considered.
- Medium characteristics: Dielectric constant, corrosiveness, and adhesion affect the choice of antenna material.
- Process conditions: Temperature and pressure ranges must be within the allowable range of the instrument.
- Output and communication: Select the corresponding output signal according to the control system interface.
- Certification requirements: For explosive hazardous areas, intrinsically safe or flameproof types must be selected.
FAQ
What media is FMR60B suitable for?
It is suitable for liquids, slurries, and granular solids, but the dielectric constant of the medium must meet the minimum requirement (usually ≥1.8).
How can I get more technical support?
Please download the FMR60B Chinese manual or contact the supplier's technical support.