RIA452 Recorder Spare Parts Overview
The RIA452 recorder is a commonly used instrument in industrial process control, and its spare parts management is crucial to ensuring production continuity. This article compiles a list of commonly used spare parts for the RIA452 series recorder, including mechanical parts, electrical connection parts, and accessories, for reference by engineering and technical personnel and procurement staff.
Spare parts are classified by function, covering housing seals, mounting brackets, terminal blocks, jumpers, etc. All spare parts are provided with order numbers for direct procurement.
RIA452 Recorder Spare Parts List
The table below lists the main spare parts for the RIA452 recorder, including item number, order number, and specification description. Please select the corresponding model according to actual needs.
| Item No. | Order No. | Specification Description |
|---|---|---|
| 1 | RIA452X-HA | Recorder spare part RIA452X |
| 2 | 50070730 | Gasket housing RIA 450 |
| 3 | 51008272 | Ex-Frame connectors RIA452 |
| 4 | RIA452X-HB | Recorder spare part RIA452X |
| 5 | RIA452X-RA | Recorder spare part RIA452X |
| 6 | RIA452X-MA | Recorder spare part RIA452X |
| 6 | RIA452X-MB | Recorder spare part RIA452X |
| 6 | RIA452X-MC | Recorder spare part RIA452X |
| 6 | RIA452X-MD | Recorder spare part RIA452X |
| 6 | RIA452X-ME | Recorder spare part RIA452X |
| 6 | RIA452X-MF | Recorder spare part RIA452X |
| 6 | RIA452X-MG | Recorder spare part RIA452X |
| 6 | RIA452X-MH | Recorder spare part RIA452X |
| 7 | RIA452X-IA | Recorder spare part RIA452X |
| 7 | RIA452X-IB | Recorder spare part RIA452X |
| 7 | RIA452X-IC | Recorder spare part RIA452X |
| 8 | RIA452X-DA | Recorder spare part RIA452X |
| 10 | 50078843 | Terminal blocks Ecograph/Memograph/S + Alphalog from unit No.410297XA |
| 10 | 71123475 | Terminal blocks for power supply RSG30: from unit No. DB001004267 orange coloured connector |
| 11 | 51005104 | Terminal blocks Memo-Graph/Memo-Gr.S/Eco-Graph C relay |
| 12 | 51009302 | Terminal strip 4 pole |
| 13 | 51008588 | Terminal strip 6 pole |
| 14 | 51008587 | Terminal strip 5 pole |
| 15 | 50033350 | Jumper 2pole setup locking |
| 71035359 | Mounting bracket | |
| 51009957 | Housing IP65 RIA452 |
Accessories and Selection
In addition to spare parts for the recorder itself, the RIA452 system also commonly uses the following accessories for signal isolation, commissioning, and software configuration.
RB223 Passive Safety Barrier
The RB223 passive safety barrier is used in intrinsically safe circuits to achieve electrical isolation and signal transmission.
- Supports 0/4-20mA signals
- Electrical isolation, 1:1 transmission
- Bidirectional HART communication
- 22.5mm housing, 35mm DIN rail mounting, protection class IP20
TXU10 Instrument Setup Package
The TXU10 setup package is used for devices that can be programmed and commissioned via PC. It includes program setting software and a PC connection cable with a USB interface, facilitating on-site commissioning and parameter configuration.
RIA452S Release Code
The RIA452S release code includes Readwin software and is only applicable to devices with serial number A3002B04264 and later. Note: Due to material class group ZTA1, only 1 piece per item can be ordered in a quotation/order.
RXU10 Data Manager Accessory
RXU10 is a data manager accessory used for data storage and transmission. Please refer to the relevant technical documentation for specific specifications.
Ordering and Service
To order spare parts or obtain technical service, please contact us. Please provide accurate order numbers and quantities to ensure fast delivery.