VEGASWING 51 Chinese Manual Download
You can directly download the VEGASWING 51 Chinese manual to obtain complete installation, commissioning, and maintenance guidelines.
Download VEGASWING 51 Chinese Manual.pdf
VEGASWING 51 Product Overview
VEGASWING 51 is a vibrating level switch launched by VEGA, used for limit detection of liquids and bulk solids. Its compact structure and high reliability make it widely used in industrial process control.
Working Principle
Based on the tuning fork vibration principle, when the medium covers the tuning fork, the vibration frequency changes, and the switch outputs a signal. No calibration is required, and it is resistant to adhesion, suitable for various media.
Main Features
- Suitable for liquids and bulk solids
- No calibration required, ready to use
- Resistant to adhesion and vibration
- Multiple process connections and materials available
- High protection rating (IP66/IP67)
Technical Parameters and Selection
When selecting, pay attention to process temperature, pressure, medium characteristics, and output mode.
Key Parameter Table
| Parameter | Value/Option |
|---|---|
| Process temperature | -40°C ~ +150°C |
| Process pressure | -1 ~ +64 bar |
| Output mode | Relay, transistor, NAMUR |
| Process connection | Thread, flange |
| Material | Stainless steel, Hastelloy, etc. |
| Protection rating | IP66/IP67 |
Selection Steps
- Confirm the medium type (liquid/solid)
- Determine the process temperature and pressure range
- Select the output mode and process connection
- Select the material based on corrosiveness
- Refer to the manual to confirm electrical parameters
Installation and Commissioning
Correct installation is the key to ensuring measurement accuracy. Please follow the points below.
Installation Precautions
- The installation position should avoid material impact and strong vibration
- Ensure the tuning fork is fully immersed in or in contact with the medium
- For horizontal installation, the tuning fork should tilt downward about 20°
- Avoid installation near the feed inlet
Commissioning Steps
- Check whether the electrical connections are correct
- After power-on, observe the indicator light status
- Use the medium to perform an action test
- Adjust sensitivity as needed (if available)
Common Problems and Maintenance
Regular maintenance can extend service life and reduce failures.
Common Problems
- No output signal: Check power supply and wiring
- False triggering: Check medium adhesion or vibration interference
- Indicator light not on: Check power supply and fuse
Maintenance Recommendations
- Regularly clean the tuning fork to prevent adhesion
- Check the sealing of the process connection
- Avoid mechanical damage
Summary
VEGASWING 51 is a highly reliable vibrating level switch. Correct selection, installation, and maintenance can ensure long-term stable operation. Download the Chinese manual to obtain complete technical information.