VEGASOURCE 81 Product Overview
VEGASOURCE 81 is a radiation source container used in nuclear radiation measurement technology, specifically designed for industrial level, density, and other measurement scenarios. It can safely shield the radioactive source and emit a directional beam during operation. This article provides the official Chinese manual download and outlines key operation and maintenance information.
Main Application Areas
- Petrochemical: reactor, storage tank level measurement
- Power industry: coal bunker, ash hopper level monitoring
- Metallurgy and mining: blast furnace, ore bin level control
- Building materials and cement: raw meal silo, cement silo level detection
Technical Parameters and Specifications
VEGASOURCE 81 offers multiple models to accommodate different radioactive source types and beam angles. The table below lists the core parameters; for specific model selection, please refer to the complete manual.
| Parameter | Specification |
|---|---|
| Applicable radioactive sources | Cs-137, Co-60, etc. |
| Beam angle | Standard 20°, 40°, other angles optional |
| Protection rating | IP65 / IP67 (optional) |
| Operating temperature | -40°C ~ +80°C |
| Material | Stainless steel housing, lead or tungsten shielding |
| Safety certification | Complies with ISO 2919, GB 4075, and other standards |
Installation and Commissioning Steps
Proper installation is a prerequisite for ensuring measurement accuracy and radiation safety. Please follow the steps below and strictly comply with local radiation safety regulations.
- Pre-installation inspection: Confirm that the container appearance is free of damage, the locking mechanism is flexible, and the radioactive source information is clear.
- Fix the container: Install VEGASOURCE 81 on a stable bracket, ensuring the beam direction is aligned with the detector.
- Connect the operating mechanism: Install the handle or remote operation cable and test whether the switching action is smooth.
- Commission the beam: Under professional supervision, open the beam, observe the detector signal, and adjust the alignment angle.
- Lock and label: After commissioning, lock the container and affix radiation warning labels.
Safe Operation and Maintenance Key Points
VEGASOURCE 81 is nuclear radiation equipment and must be operated by authorized personnel. Daily maintenance should focus on shielding integrity and switch reliability.
Safety Precautions
- Unauthorized personnel are strictly prohibited from operating or disassembling the container.
- During operation, minimize stay time near the beam and maintain distance.
- Regularly use a radiation monitor to check the container surface dose rate.
- If container damage or signs of source leakage are found, immediately isolate and report.
Maintenance Plan
- Monthly: Check switch flexibility, locking device, and label clarity.
- Annually: Conduct leak testing and dose rate detection by a professional organization.
- Every 5 years: Conduct a comprehensive inspection or replacement of the radioactive source according to regulatory requirements.
Common Problems and Troubleshooting
The following lists common problems during the use of VEGASOURCE 81 and suggested solutions. If the fault cannot be resolved, please contact the manufacturer or authorized service provider.
| Symptom | Possible Cause | Solution |
|---|---|---|
| Beam cannot be opened | Operating mechanism stuck or locked | Check handle/cable, lubricate or unlock |
| Signal strength decreased | Beam misaligned or source decay | Re-align, replace radioactive source if necessary |
| Surface dose rate exceeds limit | Shielding damage | Stop use immediately, contact professionals for repair |
Manual Download and Technical Support
Click the link below to download the complete VEGASOURCE 81 Chinese Manual (PDF format). For model selection or installation guidance, please contact VEGA official or authorized distributors.