VEGADIS 82 Chinese Manual Download
This page provides the PDF file download of the VEGADIS 82 Chinese manual, making it convenient for on-site engineers and procurement personnel to consult at any time. The manual covers complete information including installation, wiring, commissioning, and troubleshooting.
Click to download: VEGADIS 82 Chinese Manual.pdf
VEGADIS 82 Product Overview
VEGADIS 82 is an external display and adjustment module used for VEGA series level and pressure instruments. It supports remote reading of measured values and can directly set parameters on the instrument via buttons.
This module is often used in working conditions that require on-site display or where the operating position is inconvenient, such as tank tops, high towers, or hazardous areas.
Main Functions
- High-brightness OLED display: Clearly readable in both strong light and dark environments.
- Four-button operation: Supports menu navigation, value adjustment, and confirmation.
- Compatible with multiple VEGA instruments: Communicates via HART or VEGA protocol.
- Protection rating IP66/IP67: Suitable for outdoor and humid environments.
Technical Parameters Quick Reference
The table below lists the key technical parameters of VEGADIS 82 for model selection and procurement reference.
| Parameter Item | Value/Description |
|---|---|
| Supply Voltage | 20…72 V DC / 20…253 V AC |
| Power Consumption | ≤ 3.5 VA |
| Display Type | OLED, 128 × 64 pixels |
| Ambient Temperature | -40…+70 °C |
| Protection Rating | IP66/IP67 |
| Communication Protocol | HART, VEGA protocol |
Installation and Wiring Steps
Correct installation and wiring are prerequisites for ensuring the stable operation of VEGADIS 82. Please operate according to the following steps:
- Confirm that the instrument is powered off and comply with on-site safety regulations.
- Fix VEGADIS 82 in a suitable position, ensuring the display face is oriented toward the operator.
- Open the housing and connect the power and signal lines according to the wiring diagram in the manual.
- After checking that the wiring is correct, restore power supply.
- Observe whether the display lights up normally. If there is no display, check the power polarity.
Display and Parameter Settings
VEGADIS 82 supports direct adjustment of instrument parameters via buttons without the need for an additional computer. Common settings include measuring range, unit, damping time, etc.
Basic Operations
- ESC key: Return to the previous menu or cancel input.
- +/- keys: Switch menu items or modify values.
- OK key: Confirm selection or enter edit mode.
For the detailed menu tree and parameter descriptions, please refer to the VEGADIS 82 Chinese Manual.
Common Issues and Maintenance
To extend the service life of VEGADIS 82, it is recommended to regularly check the housing seal and wiring terminals. Common issues and handling are as follows:
- Display blurred or missing: Check whether the supply voltage is within range, or OLED aging.
- Buttons unresponsive: Confirm that the keypad is not locked, or restart the device.
- Communication failure: Check the HART loop resistance and wiring polarity.
If the problem persists, please download the complete VEGADIS 82 Chinese Manual to consult the fault code table.