VEGAMET 862 Chinese Manual Download
You can directly click the link below to obtain the VEGAMET 862 Chinese manual. This document details the installation, wiring, commissioning, and maintenance methods of the instrument.
Download VEGAMET 862 Chinese Manual.pdf
VEGAMET 862 Product Overview
VEGAMET 862 is a signal processing instrument for level, pressure, and process pressure transmitters. It can display, control, and supply power to 4…20 mA/HART signals. It is suitable for continuous measurement of liquid storage tanks, process vessels, and silos, providing reliable on-site indication and relay outputs for engineering technicians.
The instrument supports intrinsically safe and flameproof transmitter power supply and has SIL 2 certification, meeting the requirements of high-safety-level applications.
Core Functions and Advantages
Display and Operation
- Backlit LCD display, supporting multilingual menus (including Chinese)
- 4 buttons for quick parameter setting and calibration
- Can display measured values, percentages, current values, and trend graphs
Control and Output
- Up to 6 relay outputs for pump control, alarms, or limit monitoring
- 1 active 4…20 mA output, can be transmitted to PLC or DCS
- Supports totalizer function for flow or volume total calculation
Power Supply and Communication
- Provides intrinsically safe power supply (Ex ia) for two-wire transmitters
- Supports HART communication, can be configured via VEGACONNECT or AMS
- Wide-range power supply: 20…253 V AC/DC, adapting to various on-site power supplies
Typical Application Scenarios
- Tank level display and automatic pump control
- Process vessel high/low level alarm and interlock
- Silo level measurement and discharge control
- Flow totalization and batch control
Technical Parameters Quick Reference
| Parameter | Specification |
|---|---|
| Input signal | 4…20 mA / HART |
| Output signal | 4…20 mA (active), relay |
| Number of relays | Up to 6 |
| Supply voltage | 20…253 V AC/DC |
| Protection rating | IP 65 (front) |
| Ambient temperature | -40…+60 °C |
| Safety certification | SIL 2, ATEX |
Wiring and Commissioning Steps
- Confirm that the supply voltage matches the instrument nameplate and disconnect the power.
- Connect the transmitter to the intrinsically safe terminals according to the manual (if in an Ex area).
- Connect the relay load and the 4…20 mA output loop.
- After power-on, enter the menu via the buttons and select Chinese language.
- Set the measurement unit, range, and relay action points.
- Save the parameters and exit, then observe whether the displayed value matches the actual level.
Selection and Procurement Recommendations
When purchasing the VEGAMET 862, please confirm the transmitter type (two-wire/four-wire), whether intrinsically safe certification is required, the number of relays, and the supply voltage. If used for safety interlocking, select the version with SIL 2 certification.
It is recommended to also download the VEGAMET 862 Chinese manual to verify terminal definitions and certification parameters, avoiding on-site wiring errors.