FieldPort SWA50
Technical Data
CompareWireless components
| Measuring Principle | WirelessHART |
| Function | Intelligent WirelessHART and/or Bluetooth® interface module for easy and fast connection to HART devices |
| Certification | Non-hazardous area, ATEX, IEC Ex |
| Input | One point-to-point with HART device |
| Output | WirelessHART and/or Bluetooth® communication interface, Operating frequency: 2.4 GHz (ISM band), Transmission range under reference conditions: WirelessHART communication - up to 200 m (656 ft), Bluetooth communication - up to 40 m (131 ft) |
| Auxiliary power supply / Loop power supply | Loop-powered 4 to 20 mA |
| Dimensions (wxhxd) | W x H x D: 146 mm x 42 mm x 42 mm (dimensions in mm 25.4 = 1 inch) |
| Software | Internal software for reading data from HART field devices and communicating over WirelessHART and/or Bluetooth® |
| Operation | Integral via DIP-switches, Cell Phone configuration via SmartBlue App and Bluetooth®, Field Xpert configuration via Bluetooth® or HART-modem, PC configuration via FieldCare and HART-modem, PC configuration via FieldCare and WirelessHART Gateway |
| Operating Voltage | 24 V DC (min. 4 V DC, max. 30 V DC): min. 3.6 mA loop current required for start-up Voltage drop if internal HART communication resistor is deactivated: 3.2 V in operation, < 3.8 V at start-up Voltage drop if internal HART communication resistor is activated (270 Ohm): < 4.2 V at 3.6 mA loop current, < 9.3 V at 22.5 mA loop current |
FieldPort SWA50 connects HART field devices and reliably converts the HART signal into an encrypted Bluetooth® or WirelessHART signal. Use the Endress+Hauser SmartBlue app or Endress+Hauser Field Xpert to configure FieldPort SWA50 and view the measured values and the status of the connected HART field devices. HART field devices can be connected to the Netilion cloud ecosystem via FieldPort SWA50 and FieldEdge.
Benefits
Connect FieldPort SWA50 to reliably transmit process measured values via encrypted Bluetooth® or WirelessHART communication
Easily upgrade all two-wire or four-wire HART field devices
All HART field devices can be easily connected to the Netilion cloud ecosystem
The adapter is loop-powered and does not interfere with the process signal
Easily query diagnostic information of the connected HART field devices via the wireless connection
Application
FieldPort can easily upgrade all two-wire or four-wire HART field devices and can be installed in hazardous and non-hazardous areas. FieldPort SWA50 is equipped with a stainless steel housing, is robust and durable, and can be used in demanding operating conditions.
E+H product model configuration tool
Please enter the product model to configure
Product comparison
Please enter the product models to compare in the fields below, up to three products
Technical documentation
Technical specifications
Documents / Manuals / Software
Accessories / Spare parts
Source: Endress+Hauser public website information
Case Studies
Municipal Wastewater Treatment — Wastewater Treatment Plant · Gateways and Modems Application Case
Project Background
Municipal Wastewater Treatment customers at the Wastewater Treatment Plant stage have long faced the challenge of insufficient accuracy in effluent quality monitoring and instruments prone to contamination causing data drift, affecting compliance discharge, placing higher demands on the stability and measurement accuracy of Gateways and Modems.
Solution
Based on the on-site conditions, the Ainstru technical team selected suitable Gateways and Modems for the customer and delivered one-stop service covering selection, installation, commissioning and tuning.
Results
- Measurement accuracy and response speed significantly improved, with stable and reliable data;
- Instruments adapt to complex Municipal Wastewater Treatment conditions, greatly reducing maintenance;
- Helping customers achieve continuous online monitoring and cost reduction, highly recognized by customers.
Food & Beverage — Food Production Line · Gateways and Modems Application Case
Project Background
Food & Beverage customers at the Food Production Line stage have long faced the challenge of high hygienic measurement requirements, with inline instruments needing to withstand CIP/SIP cleaning while maintaining stable accuracy, placing higher demands on the stability and measurement accuracy of Gateways and Modems.
Solution
Based on the on-site conditions, the Ainstru technical team selected suitable Gateways and Modems for the customer and delivered one-stop service covering selection, installation, commissioning and tuning.
Results
- Measurement accuracy and response speed significantly improved, with stable and reliable data;
- Instruments adapt to complex Food & Beverage conditions, greatly reducing maintenance;
- Helping customers achieve continuous online monitoring and cost reduction, highly recognized by customers.
Chemical & Pharmaceutical — Reactors and Storage Tanks · Gateways and Modems Application Case
Project Background
Chemical & Pharmaceutical customers at the Reactors and Storage Tanks stage have long faced the challenge of highly corrosive media and complex conditions, requiring corrosion-resistant and explosion-proof instruments, placing higher demands on the stability and measurement accuracy of Gateways and Modems.
Solution
Based on the on-site conditions, the Ainstru technical team selected suitable Gateways and Modems for the customer and delivered one-stop service covering selection, installation, commissioning and tuning.
Results
- Measurement accuracy and response speed significantly improved, with stable and reliable data;
- Instruments adapt to complex Chemical & Pharmaceutical conditions, greatly reducing maintenance;
- Helping customers achieve continuous online monitoring and cost reduction, highly recognized by customers.
Power & Energy — Power Plant Boiler and Turbine · Gateways and Modems Application Case
Project Background
Power & Energy customers at the Power Plant Boiler and Turbine stage have long faced the challenge of unstable measurement under high temperature and pressure, with high maintenance and downtime costs, placing higher demands on the stability and measurement accuracy of Gateways and Modems.
Solution
Based on the on-site conditions, the Ainstru technical team selected suitable Gateways and Modems for the customer and delivered one-stop service covering selection, installation, commissioning and tuning.
Results
- Measurement accuracy and response speed significantly improved, with stable and reliable data;
- Instruments adapt to complex Power & Energy conditions, greatly reducing maintenance;
- Helping customers achieve continuous online monitoring and cost reduction, highly recognized by customers.
