典型应用
FP360 sc测油仪是专为监测水中的痕量矿物油而设计的水中油在线分析仪，应用于市政和工业污水，给水处理和工艺水处理 （非防爆危险的区域），工业过程监测，海水淡化进水监测，膜处理等。
工作原理
FP360 sc测油仪基于PAHs的荧光特性，采用紫外荧光法测定水中多环芳烃的浓度。受紫外光激发的PAHs会产生短时间的延迟发光，光的强度会在360nm的波长下测量到，该水中油分析仪通过检测PAH的浓度，计算出水体中油的总含量。
仪器特点
● FP360 sc测油仪是一款采用紫外荧光法的水中油在线分析仪，灵敏度高。
● FP360 sc测油仪可选配钛合金材质探头，测量海水和高含盐样品。
● FP360 sc测油仪不受水中悬浮颗粒物的影响，运行稳定。
● 多种安装方式可供选择：浸没式，流通式，插入式。
● FP360 sc测油仪可连接sc控制器平台。
量程： 0-15mg/L（水中油），0-500 μg/L PAH
0-150mg/L（水中油），0-5000 μg/L PAH
精度： 约读数的 ±5% 或满量程的 ±1%
分辨率： 最低量程范围内0.01ppb(PAH)
响应时间： 10s
安装方式： 浸没式、流通式、插入式
光源： 微型的氙气闪光灯，带干扰过滤器（峰值波长为254nm，25nm FWHM）。输出能量由内部的参考紫外二极管来控制。
检测器： 360nm 光电二极管，带滤光片
探头材质： 不锈钢、钛合金（耐海水腐蚀）
订购指南
FP360 sc传感器独立订货号
LXV441.99.11102 FP360 sc,量程为0-500ppb,不锈钢材质，10米电缆，无清洗装置
LXV441.99.11202 FP360 sc,量程为0-500ppb,不锈钢材质，10米电缆，带清洗装置
LXV441.99.11302 FP360 sc,量程为0-500ppb,不锈钢材质， 1.5米电缆，无清洗装置
LXV441.99.21102 FP360 sc,量程为0-5000ppb,不锈钢材质，10米电缆，无清洗装置
LXV441.99.21202 FP360 sc,量程为0-5000ppb,不锈钢材质，10米电缆，带清洗装置
LXV441.99.21302 FP360 sc,量程为0-5000ppb,不锈钢材质， 1.5米电缆，无清洗装置
(以上传感器货号不含sc200控制器，以上量程为多环芳烃的浓度含量)
安装附件
LZX914.99.11110 不锈钢链式安装附件
LZY699 流通式安装附件（带面板和软管）
LZY619 5米压缩空气软管，6mm外径（和链式安装连接）
LZY620 10米压缩空气软管，6mm外径（和链式安装连接）
LZY621 25米压缩空气软管，6mm外径（和链式安装连接）
来源:哈希水质网站公开信息
Case Studies
Municipal Wastewater Treatment — Wastewater Treatment Plant · Controllers and Sensors Application Case
Project Background
Municipal Wastewater Treatment customers at the Wastewater Treatment Plant stage have long faced the challenge of insufficient accuracy in effluent quality monitoring and instruments prone to contamination causing data drift, affecting compliance discharge, placing higher demands on the stability and measurement accuracy of Controllers and Sensors.
Solution
Based on the on-site conditions, the Ainstru technical team selected suitable Controllers and Sensors for the customer and delivered one-stop service covering selection, installation, commissioning and tuning.
Results
- Measurement accuracy and response speed significantly improved, with stable and reliable data;
- Instruments adapt to complex Municipal Wastewater Treatment conditions, greatly reducing maintenance;
- Helping customers achieve continuous online monitoring and cost reduction, highly recognized by customers.
Food & Beverage — Food Production Line · Controllers and Sensors Application Case
Project Background
Food & Beverage customers at the Food Production Line stage have long faced the challenge of high hygienic measurement requirements, with inline instruments needing to withstand CIP/SIP cleaning while maintaining stable accuracy, placing higher demands on the stability and measurement accuracy of Controllers and Sensors.
Solution
Based on the on-site conditions, the Ainstru technical team selected suitable Controllers and Sensors for the customer and delivered one-stop service covering selection, installation, commissioning and tuning.
Results
- Measurement accuracy and response speed significantly improved, with stable and reliable data;
- Instruments adapt to complex Food & Beverage conditions, greatly reducing maintenance;
- Helping customers achieve continuous online monitoring and cost reduction, highly recognized by customers.
Chemical & Pharmaceutical — Reactors and Storage Tanks · Controllers and Sensors Application Case
Project Background
Chemical & Pharmaceutical customers at the Reactors and Storage Tanks stage have long faced the challenge of highly corrosive media and complex conditions, requiring corrosion-resistant and explosion-proof instruments, placing higher demands on the stability and measurement accuracy of Controllers and Sensors.
Solution
Based on the on-site conditions, the Ainstru technical team selected suitable Controllers and Sensors for the customer and delivered one-stop service covering selection, installation, commissioning and tuning.
Results
- Measurement accuracy and response speed significantly improved, with stable and reliable data;
- Instruments adapt to complex Chemical & Pharmaceutical conditions, greatly reducing maintenance;
- Helping customers achieve continuous online monitoring and cost reduction, highly recognized by customers.
Power & Energy — Power Plant Boiler and Turbine · Controllers and Sensors Application Case
Project Background
Power & Energy customers at the Power Plant Boiler and Turbine stage have long faced the challenge of unstable measurement under high temperature and pressure, with high maintenance and downtime costs, placing higher demands on the stability and measurement accuracy of Controllers and Sensors.
Solution
Based on the on-site conditions, the Ainstru technical team selected suitable Controllers and Sensors for the customer and delivered one-stop service covering selection, installation, commissioning and tuning.
Results
- Measurement accuracy and response speed significantly improved, with stable and reliable data;
- Instruments adapt to complex Power & Energy conditions, greatly reducing maintenance;
- Helping customers achieve continuous online monitoring and cost reduction, highly recognized by customers.
