TH53备件表：工业温度仪表备件选型指南

TH53备件表概述

TH53备件表涵盖了工业温度测量系统中常用的备件，包括变送器、接线盒、热电偶套管、显示单元及附件。本表提供详细的订货号、规格描述和技术参数，便于工程技术人员和采购人员快速识别和选型。

通用备件

TMT142X系列备件

TMT162X系列备件

热电偶及套管

TU121- 热电偶插入件

• TC Insert TU121, General Purp, US Style
• Spare part.
• Thermocouple Insert spring loaded.
• Thermocouple comply with EMF tables of ASTM E-230 and IEC60584.
• Color codes per ASTM E-230.

TU51- 热电偶套管

• Thermowell TU51, Weld-in US Style
• Bar stock Thermowell, CRN Number.

TU52- 热电偶套管

• Thermowell TU52, Socked Weld US Style
• Bar stock Thermowell, CRN Number.

TU53- 热电偶套管

• Thermowell TU53, Screw In US Style
• Bar stock Thermowell, CRN Number.

接线盒

TA30H- 接线盒

• Terminal Head TA30H
• Retainer for terminal block or head transmitter + optional display.
• Design: explosion proof.
• Cover: screwed, optional window.
• Material: aluminium.
• Coating: polyester powder-coating.
• Colour: body blue, cover grey.
• Ambient temp.: -50#150 oC (housing).
• Protection: IP66/68, NEMA 4X (housing).
• Protection Ex d/XP: IP66/67 (housing).
• 备注: A

TA30R- 接线盒

• Terminal Head TA30R
• Retainer for terminal block or head transmitter + optional display.
• Cover: screwed, optional window.
• Material: Stainless Steel 316L.
• Colour: Steel (no coating).
• Ambient Temp.: -50...85/130 oC (display/standard).
• Protection: IP66/68, NEMA4X; IP69K (housing).
• Features: easy wiring through best accessibility; compact design and low weight.

变送器

TMT82- 温度变送器

• iTEMP TMT82, Transmitter HART
• 2-wire temperature transmitter.
• Dual universal sensor input.
• Galvanic isolation 2kV (input/output).
• Application: RTD, TC, Ohm and mV.
• Features: Highly reliable due to drift detection and sensor back up; Optional also for safety critical applications by means of SIL 2/3 acc. to IEC61508.

TMT84- 温度变送器

• iTEMP TMT84, Transmitter PA
• Dual sensor input.
• Advanced diagnostics: sensor monitoring.
• PROFIBUS PA Profile 3.02.
• Galvanic isolation 2kV.
• Application: RTD, TC, Ohm, mV.
• Current consumption: 11 mA.
• Mounting: head form B, DIN EN50446.
• Factory setup: CH1: Pt100, 3-wire, oC; CH2: inactive.
• Differing configuration optional selectable.
• 备注: B

TMT85- 温度变送器

• iTEMP TMT85, Transmitter FF
• Dual sensor input.
• Advanced diagnostics: sensor monitoring.
• FOUNDATION Fieldbus protocol
• Galvanic isolation 2 kV.
• Application: RTC, TC, Ohm, mV.
• Current consumption: 11 mA.
• Mounting: head form B, DIN EN50446.
• Factory setup: CH1: Pt100, 3-wire, oC; CH2: inactive.
• Differing configuration optional selectable.

TMT181- 温度变送器

• **iTEMP TMT181, Head Transmitter PCP
• Product being phased out, limited availability.
• Temperature transmitter, PC-programmable.
• Application: RTD, TC, Ohm, mV.
• 2-wire 4-20mA, galvanic isolation.
• Fault reaction: NAMUR NE 43.
• Mounting: head form B, DIN EN50446.
• UL listed.

TMT182- 温度变送器

• **iTEMP TMT182, Head Transmitter HART
• Product being phased out, limited availability.
• Temperature transmitter, Protocol HART.
• Application: RTD, TC, Ohm, mV.
• 2-wire 4-20mA, galvanic isolation.
• Fault reaction: NAMUR NE 43.
• Mounting: head form B, DIN EN50446.
• UL listed.

显示单元

TID10- 显示单元

• Display Unit Head Transmitter to plug on.
• Dot-Matrix measured value display.
• 12 DIP-switches bottom side.
• Settings: FF: Simulation, Write Lock; PA: Bus address, Write Lock.
• Compatible: TMT85, TMT84, TMT82, TMT71, TMT72.
• 备注: F

外壳及电子部件

软件及配置工具

READWIN- 操作软件

• Readwin 2000 Operation + Read. software

TXU10- 配置套件

• Configuration Kit TXU10 for PC-programmable devices.
• set-up programme+interface cable for PC with USB-Port.

FXA195- 调制解调器

• Commubox FXA195
• Modem to connect HART field devices to a computer via USB. Commissioning of field devices with software tool.
• Features: To connect to a intrinsically safe signal circuit; SIL2, IEC61508.

热电偶组件

TH55- 热电偶组件

• TC Assembly TH55, Spring US Style
• Spring loaded temperature measuring device, without thermowell.
• Comply with EMF tables of ASTM E-230 and IEC60584.
• Color Codes per ASTM E-230.