FMP50 Chinese Manual Download
You can directly download the complete FMP50 Chinese manual to obtain official technical documentation. This manual includes core content such as instrument specifications, wiring diagrams, operation procedures, and troubleshooting.
Download FMP50 Chinese Manual.pdf
FMP50 Product Overview
FMP50 is an instrument widely used in industrial process control, supporting multiple signal inputs and outputs. Its design is compact with a high protection rating, suitable for harsh environments.
Main Features
- High-precision measurement and strong stability
- Supports HART communication protocol
- Wide temperature range operation, protection rating IP67
- Flexible local display and remote configuration
Technical Parameters Quick Reference
| Parameter | Specification |
|---|---|
| Measurement range | 0~10 MPa (customizable) |
| Output signal | 4~20 mA / HART |
| Power supply | 24 VDC |
| Accuracy class | ±0.1% FS |
| Process connection | G1/2, 1/2 NPT |
Installation and Wiring Steps
Correct installation is the foundation for ensuring the long-term stable operation of the FMP50. Please follow the steps below:
- Confirm that the pipeline has no pressure and close the shut-off valve.
- Screw the instrument into the process connection port and use a suitable seal.
- Connect the power and signal lines according to the wiring diagram in the manual.
- After power-on, check whether the display is normal.
Parameter Setting and Calibration
Menu Operation
Enter the parameter menu through local buttons or a HART communicator. Common settings include upper and lower range limits, damping time, and unit switching.
Calibration Method
- Zero calibration: perform zero shift under no pressure.
- Full-scale calibration: apply standard pressure and adjust the full-scale potentiometer or software value.
- After calibration, verify linearity; the error should be less than the accuracy class.
Maintenance and Troubleshooting
Regularly check the sealing and electrical connections of the FMP50 to extend its service life. Common faults and solutions are as follows:
| Symptom | Possible Cause | Solution |
|---|---|---|
| No display | Reverse power connection or open circuit | Check power polarity and lines |
| Large output deviation | Zero drift or blockage | Recalibrate, clean the impulse line |
| Communication failure | Missing HART resistor | Connect a 250Ω resistor in series in the loop |
Summary
This article provides the download entry for the FMP50 Chinese manual and summarizes the key points of installation, setting, calibration, and maintenance. Engineers are advised to read the original manual in detail to ensure the instrument performs at its best.