CLS16 Product Overview
CLS16 is an instrument widely used in industrial process control, featuring high precision and stability. This Chinese manual provides complete technical specifications, installation, and operation instructions.
It is suitable for engineering technicians, procurement, and maintenance personnel, helping them quickly master product features.
Download CLS16 Chinese Manual.pdf
Main Technical Parameters
The following are the core technical indicators of CLS16 for selection reference.
| Parameter | Specification |
|---|---|
| Measurement Range | 0~100% (customizable upon request) |
| Accuracy Class | ±0.5% FS |
| Output Signal | 4-20mA / HART |
| Power Supply | 24V DC |
| Protection Class | IP67 |
Selection and Ordering Guide
Selection Points
- Measurement Medium: Confirm medium compatibility to avoid corrosion.
- Process Connection: Select thread or flange according to pipe size.
- Output Requirements: Whether HART communication or switch output is needed.
- Environmental Conditions: Temperature, pressure, and protection class requirements.
Ordering Information
When ordering, please provide the complete model code, for example: CLS16-XX-XX-XX. For the meaning of specific codes, refer to the appendix of the manual.
Installation and Commissioning Steps
Correct installation is the key to ensuring measurement accuracy. Please follow the steps below:
- Check whether the instrument appearance and accessories are intact.
- Install according to the medium flow direction, ensuring the arrow direction is consistent with the flow direction.
- Tighten the process connection to avoid leakage.
- Connect the power supply and check whether the output signal is normal.
- Adjust the zero point and span as needed.
Common Problems and Maintenance
Common Fault Handling
- No Output Signal: Check power supply and wiring.
- Large Measurement Deviation: Recalibrate or check whether the medium is blocked.
- Display Fluctuation: Confirm good grounding and eliminate interference sources.
Daily Maintenance
Regularly clean the sensor surface and check the aging of seals. It is recommended to calibrate once every 12 months.
Download the Complete Manual
For more detailed installation dimensions, electrical connection diagrams, and certification information, please click the link below to download the complete PDF document.
Download CLS16 Chinese Manual.pdf