Promag 10P Spare Parts List

The following spare parts are suitable for the Promag 10 series electromagnetic flowmeter. Please select accurately according to the order number and specification description. Spare parts are arranged by position number. Some spare parts have a harsh environment (HE) version, suitable for harsh environments.

Position Order Number Specification Description Remarks
A50104751PCB mainboard
A50104752PMAG10 mainboard
A71098237PCB mainboardHE = harsh environment
A71098239PCB mainboardHE = harsh environment
350104749Fuse
350104750Fuse
B5010474510/91W display module with keypad
C50104754Terminal
C71098240Terminal moduleHE = harsh environment
D50098018Sensor part terminalFor: 10/50/51/53/55/400/800
D71039497Sensor part terminalFor: 10/50/53/55, HE = harsh environment
15010813810/91W terminal blockKit Terminal Block 10/91W
1350094038Terminal compartment cover10/5X/40/8X/93/65/92F
1371247838Service cover, remote versionFor: 10/5X/8X/8DF/8CN/92F/65/400/800, includes: Cover Rep.kit for G14, O-Ring 110.00 x 4.50 HNBR, Grease
950094038Terminal compartment cover10/5X/40/8X/93/65/92F
550104746Meter cover with glass window
650104747Blind meter cover
1050103658Cable gland
105009684010 pcs M20x1.5 cable glandsKit 10 cable glands M20x1.5
1050098041M20x1.5/G 1/2" adapterKit 10 extension M20x1.5/G 1/2"
1050098042M20x1.5/NPT 1/2" adapterKit 10 extension M20x1.5/NPT 1/2"
450104748Display module carrier board 10/91W
750104753Meter cover seal ring
850097147Ground terminal/cover locking clip10/1YH/23/65/72/73/91W/92F/8FF/8FE/8CM
250099102Cast aluminum/stainless steel housing sleeve
1550098019Mounting screws and mounting accessoriesFor: 10/50/51/53/55/400/800, sensor: D/E/H/L/P/S/W
1250098020Mounting screws and mounting accessoriesFor: 10/23/50/51/53/55, sensor: D/E/H/L/P/S/W
1450098023WasherFor: 10/50/51/53/55/400/800, sensor: D/E/L/P/S/W
1150098024WasherFor: 10/23/50/51/53/55, sensor: D/E/L/P/S/W

Promag 10 Transmitter Selection Code

The following selection codes are applicable to the Promag 10 series transmitters, including 10W, 10P, 10H, 10D, 10L, 10E, etc. When selecting, please combine the codes according to application requirements.

Application and Version

  • 10XXX-: Promag 10 transmitter 10XXX electromagnetic flowmeter
  • XXX: Application (Promag 10W, 10P, 10H, 10D, 10L, 10E)
  • XX: Version (transmitter only)

Approval

CodeDescription
ANon-hazardous area
RFM NI Cl. I Div. 2 / CSA Cl. I Div. 2

Housing

CodeDescription
ACompact aluminum, IP67 NEMA4X
GField aluminum, IP67 NEMA4X
PCompact aluminum, IP67 NEMA4X, HE (HE= harsh environment)
TField aluminum, IP67 NEMA4X, HE (HE= harsh environment)

Cable (Remote Version)

CodeDescription
0Not used
210m/30ft coil and signal cable
4..... m coil and signal cable
5..... ft coil and signal cable

Cable Entry

CodeDescription
AGland M20
BThread NPT 1/2
CThread G 1/2

Power Supply; Display

CodeDescription
085-250VAC; no display, remote configuration
120-28VAC / 11-40VDC; no display, remote configuration
485-250VAC; 2-line display, keypad operation
520-28VAC / 11-40VDC; 2-line display, keypad operation

Adjustment; Software Function

CodeDescription
AFactory setting; basic version

Output, Input

CodeDescription
A4-20mA HART + pulse passive

Promag 10/50/51/53/55 Remote Cable DK5CA

Remote cable kit for Promag 10/50/51/53/55/400/800, each kit contains 1 coil cable and 1 signal cable.

CodeDescription
210m/30ft
4..... m
5..... ft

Approval:

CodeDescription
ANon-hazardous area + ATEX II 3G, FM/CSA

Promag 10/50/51/53/55 Transmitter Mounting Kit DK5WM

Transmitter mounting kit for Promag 10/50/51/53/55/800.

CodeDescription
BRemote, field pipe 3/4 - 3inch

Grounding Cable DK5GC

Each kit contains 2 cables.

Grounding Ring DK5GD

Contains 1 grounding disk/protection disk. The following are optional nominal diameters and material codes.

CodeDescription
15ADN15 1/2", 1.4435/316L
15BDN15 1/2", Alloy C-22
1FADN150 6", 1.4435/316L
1FBDN150 6", Alloy C-22
1HADN100 4", 1.4435/316L
1HBDN100 4", Alloy C-22
1ZADN125, 1.4435/316L
1ZBDN125, Alloy C-22
25ADN25 1", 1.4435/316L
25BDN25 1", Alloy C-22
2FADN250 10", 1.4435/316L
2FBDN250 10", Alloy C-22
2HADN200 8", 1.4435/316L
2HBDN200 8", Alloy C-22
32ADN32, 1.4435/316L
32BDN32, Alloy C-22
3FADN350 14", 1.4435/316L
3FBDN350 14", Alloy C-22
3HADN300 12", 1.4435/316L
3HBDN300 12", Alloy C-22
40ADN40 1 1/2", 1.4435/316L
40BDN40 1 1/2", Alloy C-22
4FADN450 18", 1.4435/316L
4FBDN450 18", Alloy C-22
4HADN400 16", 1.4435/316L
4HBDN400 16", Alloy C-22
50ADN50 2", 1.4435/316L
50BDN50 2", Alloy C-22
5HADN500 20", 1.4435/316L
5HBDN500 20", Alloy C-22
65ADN65, 1.4435/316L
65BDN65, Alloy C-22
6HADN600 24", 1,4435/316L
6HBDN600 24", Alloy C-22
80ADN80 3", 1.4435/316L
80BDN80 3", Alloy C-22

Lining

CodeDescription
9Special version, TSP number must be specified
EPTFE

Process Connection

CodeDescription
5PN16, AS4087
7Table E, AS2129
9Special version, TSP number must be specified
APN40 EN1092-1(DIN2501)
BPN25 EN1092-1(DIN2501)
CPN16 EN1092-1(DIN2501)
DPN10 EN1092-1(DIN2501)
LCl.150 ANSI B16.5
MCl.300 ANSI B16.5
T10K JIS B2220
U20K JIS B2220

Communication Interface FXA193

The service interface is used to connect the service port of Proline and ToF devices to the RS 232C serial interface (9-pin) of a personal computer.

Delivery Content:

  • Service interface with RS 232C connection cable (9-pin)
  • FXA "USB" cable, used to provide additional power to FXA193 from the PC's USB port
  • Service software ToF Tool-Fieldtool package
ApprovalDescription
9Special version, TSP number must be specified
AFor non-hazardous area
BATEX II (1) GD
CCSA/FM Class I Div. 1
DATEX, CSA, FM
Connection CableDescription
9Special version, TSP number must be specified
AProline devices
BToF devices
EProline and ToF devices
FEx two-wire devices
GProline devices and Ex two-wire devices
HProline, ToF and Ex two-wire devices
XNo connection cable