8CM Flowmeter Spare Parts List
The following is a list of common spare parts for the 8CM series flowmeters, including order numbers and specification descriptions. Please select the corresponding spare parts according to the actual model and requirements.
| No. | Order Number | Specification Description |
|---|---|---|
| 1 | 71034464 | Electronic module |
| 2 | 71034612 | Blind cover 8FF/8FE/8CM |
| 3 | 50106386 | Terminal compartment cover 72/73/92F/8FF/8FE |
| 4 | 50097147 | Grounding terminal/cover locking clamp 10/1YH/23/65/72/73/91W/92F/8FF/8FE/8CM |
| 5 | 50098036 | Explosion-proof cable glands Kit 10 cable glands M20x1.5 Ex |
| 6 | 50098042 | Adapter Kit 10 extension M20x1.5/NPT 1/2" |
| 7 | 50098041 | Adapter Kit 10 extension M20x1.5/G 1/2" |
| 8 | 71123816 | Cubemass mounting plate Universal mounting plate for fixing the flowmeter to various surfaces, such as walls, switchboards etc. |
| 9 | DK8CS- | Cubemass, mounting kit Adapters for different process connection standards. To be connected to the Cajon couplings. |
Spare Parts Selection and Installation Guide
Electronic Module and Covers
- Electronic module (71034464) is the core component of the flowmeter, responsible for signal processing and output. Ensure model compatibility when replacing.
- Blind cover (71034612) is suitable for 8FF/8FE/8CM series, used to close the opening when no display is installed.
- Terminal compartment cover (50106386) is suitable for 72/73/92F/8FF/8FE series, protecting the terminal compartment from environmental influences.
Grounding and Locking
Grounding terminal/cover locking clamp (50097147) is suitable for various models, including 8CM, ensuring safe grounding of the device and locking of the cover.
Explosion-proof Cable Glands and Adapters
- Explosion-proof cable glands (50098036) are M20x1.5 Ex specification, 10 pieces per set, used for cable entry in hazardous areas.
- Adapter (50098042) is M20x1.5 to NPT 1/2", 10 pieces per set, used for connections with different thread standards.
- Adapter (50098041) is M20x1.5 to G 1/2", 10 pieces per set, suitable for G thread connections.
Cubemass Mounting Accessories
- Cubemass mounting plate (71123816) is a universal mounting plate that can fix the flowmeter to various surfaces such as walls and switchboards.
- Cubemass mounting kit (DK8CS-) includes adapters for different process connection standards, to be connected to Cajon couplings.
Recommended Installation Steps
- Confirm the compatibility between the flowmeter model and spare parts, referring to the above specification descriptions.
- When replacing the electronic module, disconnect the power supply first and follow explosion-proof requirements (if applicable).
- When installing the cover, ensure the sealing ring is intact and evenly tighten the locking clamp.
- When using explosion-proof cable glands, ensure the cable outer diameter matches the sealing range of the gland.
- When installing adapters, use appropriate sealing tape or gaskets to prevent leakage.
- When fixing the Cubemass mounting plate, ensure the surface is flat and firm to avoid vibration effects.
Correct selection and installation of spare parts can extend the service life of the flowmeter and ensure measurement accuracy. For more information, please contact technical support.