CCS120/120D Spare Parts List Overview

The CCS120 series analyzers are widely used in disinfection, drinking water, and process water monitoring. Regular replacement of spare parts is key to ensuring measurement accuracy. The following spare parts list covers maintenance kits, electrolyte, connecting cables, O-rings, junction boxes, and calibration instruments. Please purchase accurately according to the order numbers to avoid compatibility issues.

Maintenance Kits and Electrolyte

Maintenance Kit (Order No. 71412917)

  • Applicable Model: CCS120/120D
  • Contents: Electrolyte 50 ml (1.69 fl.oz.), 2 membrane caps
  • Purpose: Daily sensor maintenance and membrane replacement

Electrolyte (Order No. 71412916)

  • Applicable Model: CCS120/120D
  • Volume: 50 ml (1.69 fl.oz.)
  • Purpose: Replenish or replace sensor electrolyte

Connecting Cables and Seals

Connecting Cable (Order No. 51517204)

  • Description: Connecting cable for CCS120 and CCE benchtop instrument
  • Length: 1 m
  • Purpose: Data transmission between analyzer and benchtop instrument

Viton O-rings (Order No. 71105209)

  • Quantity: 2 pieces
  • Material: Viton (fluoroelastomer)
  • Purpose: Replace silicone O-rings to improve chemical resistance

Junction Box and Calibration Instrument

Junction Box VBM (Order No. 50003987)

  • Terminals: 10 high-impedance terminals
  • Protection Class: IP65
  • Dimensions: 125 x 80 x 55 mm (L x W x H)

Handheld DPD Colorimetric Calibration Instrument PF-3 (Order No. 71257946)

  • Measurement Parameters: Free chlorine and total chlorine
  • Range: 0.05 - 6 mg/l
  • Application: Disinfection, drinking water, and process water
  • Protection Class: IP67
  • Standard: Complies with ISO 7393, using DPD colorimetric method
  • Delivery Contents: Plastic case, cuvettes, free chlorine and total chlorine test kit
  • Purpose: Calibration and verification of disinfection loops

Spare Parts Selection Notes

  • Please select the corresponding spare parts according to the device model (CCS120 or CCS120D).
  • Maintenance kits and electrolyte need to be replaced regularly; it is recommended to follow the manufacturer's recommended cycle.
  • Viton O-rings are suitable for corrosive environments; replacing silicone rings can extend seal life.
  • The junction box with IP65 protection rating is suitable for humid industrial sites.
  • The PF-3 colorimeter is used for on-site calibration to ensure disinfection monitoring accuracy.