Overview of CUE23 Turbidity Meter Spare Parts
The CUE23 turbidity meter is a commonly used water quality analysis instrument in industrial processes. Its spare parts are crucial for maintaining measurement accuracy and extending equipment life. This article compiles a list of common spare parts for the CUE23, including calibration kits, sample measurement glass tubes, and illumination modules, to facilitate quick selection by engineering technicians and procurement personnel.
Spare Parts List and Specifications
The table below lists the main spare parts for the CUE23 turbidity meter, including ordering numbers, specifications, and application descriptions. All spare parts are recommended by the original manufacturer to ensure full compatibility with the instrument.
| Ordering Number | Specification | Application |
|---|---|---|
| 51518580 | CUE21/CUE23/CUE24 Calibration Kit Ready-to-use solution: 0.02 NTU, 10 NTU, and 1000 NTU |
Turbidity measurement accessory for instrument calibration |
| 51518581 | CUE23/CUE24 Sample Measurement Glass Tube With cap, pack of 3 |
Turbidity measurement accessory for sample containment |
| 71030108 | Illumination Module Light source: Infrared LED (850 nm) |
Turbidity measurement spare part for providing a stable light source |
Detailed Description of Spare Parts
Calibration Kit (Ordering Number: 51518580)
This calibration kit is suitable for CUE21, CUE23, and CUE24 series turbidity meters. It provides ready-to-use standard solutions, including three concentrations: 0.02 NTU, 10 NTU, and 1000 NTU. It helps users quickly complete instrument calibration and ensures the accuracy of measurement results. It is recommended to use the calibration kit regularly for calibration to meet industrial process control requirements.
Sample Measurement Glass Tube (Ordering Number: 51518581)
The sample measurement glass tube is designed specifically for CUE23 and CUE24. Each set contains 3 glass tubes and caps. The glass tube is used to hold the sample to be measured, and its cleanliness and light transmittance directly affect turbidity measurement accuracy. When the glass tube is scratched or contaminated, it should be replaced promptly.
Illumination Module (Ordering Number: 71030108)
The illumination module is a core spare part for turbidity measurement and uses an infrared LED light source (850 nm). This module provides a stable light signal to ensure repeatability and reliability of turbidity measurement. If the instrument shows reading drift or light source failure, this module may need to be replaced.
Selection and Maintenance Recommendations
- Regular calibration: Use the calibration kit (51518580) monthly or according to operating conditions.
- Glass tube replacement: Replace the sample measurement glass tube (51518581) immediately if it is scratched, cracked, or contaminated.
- Light source maintenance: The illumination module (71030108) has a limited lifespan. If measurement values are abnormal, please check or replace it.
- Compatibility: The above spare parts are all suitable for CUE23, and some are also compatible with CUE21/CUE24. Please confirm the model before purchasing.
Proper selection and replacement of spare parts can significantly reduce the failure rate of the turbidity meter and ensure the continuity of water quality monitoring data. For more technical information, please refer to the original manufacturer's manual or contact the supplier.