Nr
Order code
Specification
71141336
Basic module
2x 0/4..20 mA out, alarm relay
2x digital sensor, with connection cable
CM444/CM448
71431302
Base module BASE2-E
CM44: backplane version 2
and min. firmware 01.07.00 needed.
CSFxx: backplane version 2
and min. firmware 01.07.03 needed.
CA80: backplane version 2,
interface module version 2,
control module version 2
and min. firmware 01.08.00 needed.
71107452
1 accessory for CM442/CM444/CM448/CSF48/CSP44 base terminal
CM442/CM444/CM448/CSF48/CSP44
71272410
Accessory with hardware module only: upgrade to Modbus TCP or EtherNet via upgrade code
(+Webserver)
extendable via upgrade code
to Modbus TCP or EtherNet/IP
CM442/CM444/CM448/CSF48
CM442R/CM444R/CM448R
71222276
CM444R/8R housing base
71222277
CM444R/8R 230V DINrail power supply
71222279
CM444R/8R 24V DC DINrail power supply
71224563
CM44xR 24V internal power supply cable
71222282
CM44xR key protection cover
71185295
Graphic display unit
installation, plastic,
navigator+softkeys, incl. cable
IP66
CM442R/CM444R/CM448R
71185296
Portable external graphic display
commissioning, plastic,
navigator+softkeys, incl. cable
IP65
CM442R/CM444R/CM448R
71240608
CM44xR cable + grommet
71477718
Kit module 2DS Ex-i
71107455
CM442/CM444/CM448/CSF48 5 end caps and inner covers
CM442/CM444/CM448/CSF48
71111053
2 relays, 2x 0/4..20mA Out CM442 / CM444 / C
2x Relay, 2x 0/4..20mA Out
CM442 / CM444 / CM448 / CSF48
CM442R / CM444R / CM448R
71107453
1 accessory for CM442/CM444/CM448/CSF48 AOR terminal module
CM442/CM444/CM448/CSF48
71125375
2 relays CM442 / CM444 / CM448 / CSF48 CM442R
2x Relay
CM442 / CM444 / CM448 / CSF48
CM442R / CM444R / CM448R
71125376
4 relays accessory for CM442 / CM444 / CM448 / CSF48 4R
4x Relay
CM442 / CM444 / CM448 / CSF48
71155581
1 accessory for CM442/CM444/CM448/CSF48 4R terminal module
CM442/CM444/CM448/CSF48
71135631
Module 2DS
2x digital sensor
CM442 / CM444 / CM448 / CSF48
CM442R / CM444R / CM448R
71135632
2 relays, 2x 0/4..20mA Out CM442 / CM444 / C
2x 0/4..20mA Out
CM442 / CM444 / CM448 / CSF48
CM442R / CM444R / CM448R
71135633
2 relays, 2x 0/4..20mA Out CM442 / CM444 / C
4x 0/4..20mA Out
CM442 / CM444 / CM448 / CSF48
CM442R / CM444R / CM448R
71155582
1 accessory for CM442/CM444/CM448/CSF48 4AO terminal module
CM442/CM444/CM448/CSF48
71135639
2x 0/4..20mA In CM442 / CM444 / CM448 / CS
2x 0/4..20mA In
CM442 / CM444 / CM448 / CSF48
CM442R / CM444R / CM448R
71155583
1 set containing 2 AI, 485 CM442/CM444/CM448/CSF48 terminal module
CM442/CM444/CM448/CSF48
71135638
DIO module
2x digital in, 2x digital out
CM442 / CM444 / CM448 / CSF48
CM442R / CM444R / CM448R
71219784
1 accessory for DIO terminal module
71135634
Hardware module upgrade code accessory: Modul ETH + Modbus TCP (+Web
(+Webserver)
Extendable via upgrade code
to Profibus DP or Modbus RS485
or Modbus TCP or EtherNet/IP
CM442/CM444/CM448/CSF48
CM442R/CM444R/CM448R
Successor kit: 71575177 or 71575178
71575177
Kit Module 485DP
71575178
Kit Modbus 485MB extension module
71111053
2 relays, 2x 0/4..20mA Out CM442 / CM444 / C
2x Relay, 2x 0/4..20mA Out
CM442 / CM444 / CM448 / CSF48
CM442R / CM444R / CM448R
71125375
2 relays CM442 / CM444 / CM448 / CSF48 CM442R
2x Relay
CM442 / CM444 / CM448 / CSF48
CM442R / CM444R / CM448R
71125376
4 relays accessory for CM442 / CM444 / CM448 / CSF48 4R
4x Relay
CM442 / CM444 / CM448 / CSF48
71135631
Module 2DS
2x digital sensor
CM442 / CM444 / CM448 / CSF48
CM442R / CM444R / CM448R
71135632
2 relays, 2x 0/4..20mA Out CM442 / CM444 / C
2x 0/4..20mA Out
CM442 / CM444 / CM448 / CSF48
CM442R / CM444R / CM448R
71135633
2 relays, 2x 0/4..20mA Out CM442 / CM444 / C
4x 0/4..20mA Out
CM442 / CM444 / CM448 / CSF48
CM442R / CM444R / CM448R
71135639
2x 0/4..20mA In CM442 / CM444 / CM448 / CS
2x 0/4..20mA In
CM442 / CM444 / CM448 / CSF48
CM442R / CM444R / CM448R
71135638
DIO module
2x digital in, 2x digital out
CM442 / CM444 / CM448 / CSF48
CM442R / CM444R / CM448R
71135634
Hardware module upgrade code accessory: Modul ETH + Modbus TCP (+Web
(+Webserver)
Extendable via upgrade code
to Profibus DP or Modbus RS485
or Modbus TCP or EtherNet/IP
CM442/CM444/CM448/CSF48
CM442R/CM444R/CM448R
Successor kit: 71575177 or 71575178
71575177
Kit Module 485DP
71575178
Kit Modbus 485MB extension module
71140888
Hardware module + Profibus DP upgrade code accessory: Modul ETH + Prof
(+Webserver)
CM442/CM444/CM448/CSF48
CM442R/CM444R/CM448R
71140889
Upgrade kit: 485 bus module + Modbus RS485 communication
(+Webserver)
CM442/CM444/CM448/CSF48
CM442R/CM444R/CM448R
71279809
Hardware module + Fieldbus upgrade code accessory: Modul ETH + Modbus
(+Webserver)
CM442/CM444/CM448/CSF48
CM442R/CM444R/CM448R
71279812
Hardware module + EtherNet/IP upgrade code accessory: Modul ETH + Ethe
(+Webserver)
CM442/CM444/CM448/CSF48
CM442R/CM444R/CM448R
71128428
**Upgrade code
digital communication
(provide serial number of device)
CM442 / CM444 / CM448 / CSF48
CM442R / CM444R / CM448R
Successor: XPC0023 Activation code HART
71135635
Upgrade code accessory to change to Profibus DP (without hardware): CM442/CM444/
Enter this code to change active
fieldbus protocol to Profibus DP
(provide serial number of device)
CM442 / CM444 / CM448 / CSF48
CM442R / CM444R / CM448R
Successor kit: Activation code PROFIBUS
DP f 485 module
71135636
Upgrade code accessory to change to EtherNet/IP (without hardware): CM442/CM444/
Enter this code to change active
fieldbus protocol to Modbus RS485
(provide serial number of device)
CM442 / CM444 / CM448 / CSF48
CM442R / CM444R / CM448R
Successor kit: XPC0025 Activation code
ModbusRS485 f 485 module
71135637
**Upgrade code
Enter this code to change active
fieldbus protocol to Modbus TCP
(provide serial number of device)
CM442 / CM444 / CM448 / CSF48
CM442R / CM444R / CM448R
Successor Kit: XPC0020 activation code
Modbus TCP + Webserver
71140891
**CM448 upgrade code
for module BASE-E
(provide serial number of device)
CM444 / CM448 / CM444R / CM448R
Successor kit: XPC0026 activation code
Liquiline input /outputs
71211288
Upgrade code
Upgrade code: Feedforward control
requires 0/4..20mA Input or
digital communication
(provide serial number of device)
CM442/CM444/CM448/CSF48
CM442R/CM444R-CM448R
71211289
Upgrade code
Upgrade code: Measuring Range Switch
requires digital Input or
digital communication
(provide serial number of device
CM442/CM444/CM448/CSF48
CM442R/CM444R/CM448R
71219871
**Upgrade code
Enter this code to change active
fieldbus protocol to EtherNet/IP
(provide serial number of device)
CM442/CM444/CM448/CSF48
CM442R/CM444R/CM448R
Successor kit: XPC0018 activation code
EtherNet/IP + Webserver
71279813
Upgrade code: upgrade to Modbus TCP communication in ETH module
Enter this code to change active
fieldbus protocol to Modbus TCP
(provide serial number of device)
CM442/CM444/CM448/CSF48
CM442R/CM444R/CM448R
Successor kit: XPC0020 activation code
Modbus TCP + Webserver
71279830
Upgrade code accessory to change to EtherNet/IP (without hardware): CM442/CM444/C
Enter this code to change active
fieldbus protocol to EtherNet/IP
(provide serial number of device)
CM442/CM444/CM448/CSF48
CM442R/CM444R/CM448R
Successor kit: XPC0018 activation code
EtherNet IP + Webserver
71239104
Upgrade code
requires relays or digital outputs
or digital fieldbus communication
and optional digital inputs
(provide serial number of device)
CM442/CM444/CM448/CSF48
CM442R/CM444R/CM448R
71367524
Hearbeat upgrade code
(provide serial number of device)
CM442/CM444/CM448/CSF48/CA80
CM442R/CM444R/CM448R
71367541
Mathematical calculation function upgrade code
71449914
**Upgrade activation code: EtherNet/IP+Webserver BASE2
Successor kit: Kit: XPC0018 activation
code EtherNet/IP + Webserver
71449915
**Upgr.code Modbus TCP+Webserver BASE2
Successor kit: XPC0020 activation code
Modbus TCP + Webserver
71449918
**Upgrade code: Webserver for BASE2
Successor kit: XPC0021 activation code
Webserver for BASE2
71449901
**PROFINET communication + web server activation code for BASE2 module
Successor kit: XPC0022 activation code
PROFINET + Webserver
71110815
1G SD card
.
XPRFID-
Spare RFID TAG
Consists of:
RFID TAG, fixing wire, crimp sleeve.
AA
CA
1
XPSPEC-
Spare DIN SPEC TAG
Attention: Only 1 piece per position
orderable in offer/order because of
item category group ZTA1.
Consists of:
TAG, fixing wire, crimp sleeve.
AA
BA
CA
FA
IA
KA
MA
NA
UA
1
2
3
71127100
1G SD card hardware accessory for CM442/CM444/CM448/CSF48
Industrial Flash Drive,
Liquiline firmware for 4-wire platform
CM442 / CM444 / CM448 / CSF48
71520947
IEC61406 Stainl.steel TAG
71520949
IEC61406 Stainl.steel+NFC TAG
71520950
IEC61406 Stainl.steel, stainl.steel TAG
71520951
IEC61406 Stainl.steel+NFC, stainl.steel
XPC0018-
Activation code EtherNet/IP + Webserver
You get the codes for
EtherNet/IP + Webserver for your device
You don't get any hardware.
To feature 20
Communication used until now:
Correct information required for
code selection
To feature 30
Modules used until now:
Correct information required for
code selection
If you are not sure, wich
modules are used please
follow this path in the device:
Menu/Diagnostics/System information/
System modules.
A
1A
1B
1C
1D
XPC0020-
Activation code Modbus TCP + Webserver
You get the activation codes for
Modbus TCP + Webserver for your device
You don't get any hardware.
To feature 20
Communication used until now:
Correct information required for
code selection.
To feature 30
Modules used until now:
Correct information required for
code selection.
If you are not sure, which
modules are used, please
follow this path in the device:
Menu/Diagnostics/System information/
System modules.
A
1A
1B
1C
1D
XPC0021-
Activation code Webserver for BASE2
You get the activation code for the
Webserver for your device.
You don't get any hardware.
To feature 20
Modules that were installed:
Correct information required for
code selection.
A
1
2
A1
A2
A3
A4
A5
1A
1B
XPC0022-
Activation code PROFINET+Webserver BASE2
You get the activation codes for
PROFINET + Webserver for your device
You don't get any hardware
A
1A
1C
1E
1U
XPC0023-
Activation code HART
You get the activation code for
HART for your device.
You don't get any hardware.
Current output on BASE(2) module
has to be active.
A
XPC0024-
Activation code PROFIBUS DP 485 modules
You get the activation codes for
PROFIBUS DP + Webserver for your device.
You don't get any hardware.
485 module has to be installed.
Hint:
This fieldbus can only be activated on
485 module and 485 DP module
A
XPC0025-
Modbus RS485 module activation code
You get the activation codes for
Modbus RS485 + Webserver for your device
You don't get any hardware
Hint:
This fieldbus can only be activated on
485 module and 485 MB module
A
XPC0026-
Activation code Liquiline inputs/outputs
You get the activation code(s)
for inputs / outputs on the
BASE(2) module / control module.
The required hardware must be installed
to use the functionality.
12
A1