CCS50D Spare Parts List Overview
This spare parts list applies to the Memosens CCS50D sensor and its associated system, listing commonly used adapter kits, maintenance components, and calibration tools. All spare parts are marked with order number, description, and recommendation level, making it easy for engineering technicians and procurement personnel to quickly locate the required materials.
Adapter Kits
Adapter kits are used to install CCS5x or CCS5xD sensors onto different process connections. The following three kits are all suitable for the CCS5x + CCS5xD series, with recommendation levels of S or A.
CCA250 Adapter Kit
- Order number: 71372025
- Description: CCA250 adapter kit CCS5x + CCS5xD
- Recommendation level: S (preferred recommendation)
- Category: Uncategorized
CYA112 Adapter Kit
- Order number: 71372026
- Description: CYA112 adapter kit CCS5x + CCS5xD
- Recommendation level: S (preferred recommendation)
- Category: Uncategorized
CCA151 Adapter Kit
- Order number: 71372027
- Description: CCA151 adapter kit CCS5x + CCS5xD, including clamp ring, thrust ring, sealing ring
- Contents: Clamp ring, thrust ring, + sealing
- Recommendation level: S (preferred recommendation)
- Category: Uncategorized
In addition, order number 71554885 provides an adapter kit suitable for CYA27-xxxB*, described as Kit adapter CCS5x(D/E) for CYA27-xxxB*, quantity 2.
Maintenance Components and Calibration Tools
CCV05 Maintenance Kit
- Order number: CCV05-
- Description: Maintenance kit CCV05, suitable for Memosens CCSxxD and fixed cable sensor CCSxx
- Recommendation level: M
- Position: 2
- Group: Sealing ring
PF-3 Handheld DPD Colorimetric Calibration Instrument
- Order number: 71257946
- Description: Handheld DPD colorimetric calibration instrument PF-3, for colorimetric measurement of free chlorine and total chlorine
- Measuring range: 0.05 - 6 mg/l
- Application: Disinfection, drinking water, and process water
- Features: IP67 protection rating, includes cuvettes, DPD reagents, complies with ISO 7393 standard, plastic case packaging, includes free chlorine and total chlorine test kit
- Purpose: For calibration and verification of disinfection loops
- Recommendation level: A
- Category: Uncategorized
COY8 Zero-Point Gel
- Order number: COY8-
- Description: Zero-point gel COY8, for zero-point verification, calibration, and adjustment of oxygen and disinfection sensors
- Applicable sensors: Amperometric and optical sensors
- Diameter: 12, 25, and 40 mm
- Application: Laboratory and field
- Recommendation level: A
- Category: Uncategorized
Spare Parts Selection Summary Table
The table below summarizes the key information for all spare parts to facilitate comparison and procurement decisions.
| Order number | Description | Recommendation level | Category/Remarks |
|---|---|---|---|
| 71372025 | CCA250 adapter kit CCS5x + CCS5xD | S | Uncategorized |
| 71372026 | CYA112 adapter kit CCS5x + CCS5xD | S | Uncategorized |
| 71372027 | CCA151 adapter kit CCS5x + CCS5xD, including clamp ring, thrust ring, sealing ring | S | Uncategorized |
| 71554885 | Kit adapter CCS5x(D/E) for CYA27-xxxB* | - | Quantity 2 |
| CCV05- | Maintenance kit CCV05 Memosens CCSxxD/fixed cable sensor CCSxx | M | Sealing ring, position 2 |
| 71257946 | Handheld DPD colorimetric calibration instrument PF-3 | A | Uncategorized |
| COY8- | Zero-point gel COY8 | A | Uncategorized |
Selection and Procurement Recommendations
According to the recommendation levels, S-level spare parts are preferred recommendations, suitable for critical installation points; A-level spare parts are regular recommendations, suitable for general maintenance; M-level spare parts are maintenance-type, replaced as needed. When procuring, please verify the sensor model and interface dimensions to ensure compatibility.
For disinfection loop calibration, it is recommended to use the PF-3 colorimeter together with the COY8 zero-point gel to complete the full verification process. Adapter kits should be selected from CCA250, CYA112, or CCA151 according to the on-site installation method.