VEGAWAVE 62 Chinese Manual Download
You can directly download the VEGAWAVE 62 Chinese Manual to obtain complete technical data and operating instructions.
Download VEGAWAVE 62 Chinese Manual.pdf
VEGAWAVE 62 Product Overview
VEGAWAVE 62 is a vibrating level switch for liquids and solid bulk materials, which detects high and low levels through the tuning fork vibration principle. This instrument is suitable for chemical, petrochemical, water treatment, food, and pharmaceutical industries, providing reliable limit detection.
Its core advantages include:
- Suitable for a variety of liquid and solid media, including adhesive materials
- No calibration required, ready for use after installation
- Vibration and shock resistant, high reliability
- Various process connection and material options available
VEGAWAVE 62 Technical Parameters
The following are the main technical parameters of VEGAWAVE 62 for engineering selection reference.
| Parameter | Specification |
|---|---|
| Measuring principle | Vibrating tuning fork |
| Applicable media | Liquids, solid bulk materials |
| Process temperature | -40 … +150 °C |
| Process pressure | -1 … +40 bar |
| Output signal | Relay, transistor, NAMUR |
| Protection rating | IP66/IP67 |
| Process connection | Thread, flange |
| Material | Stainless steel, Hastelloy, PTFE |
VEGAWAVE 62 Installation and Commissioning
Installation Steps
- Confirm that the process connection size matches the on-site interface.
- Install the tuning fork vertically or horizontally on the vessel wall, ensuring the fork body extends into the vessel.
- Tighten the process connection, paying attention to sealing.
- Wire and power on, and observe the indicator light status.
Commissioning Points
- No empty tank and full tank calibration required, ready to work after installation.
- Adjust sensitivity via potentiometer or buttons to suit different media.
- If the medium is highly adhesive, appropriately increase sensitivity or choose a coated fork body.
VEGAWAVE 62 Selection Precautions
During selection, comprehensively consider medium characteristics, process conditions, and output requirements.
- Medium characteristics: liquid viscosity, solid particle size, whether it is easy to adhere.
- Process conditions: temperature, pressure, corrosiveness.
- Output signal: select relay, transistor, or NAMUR output according to the control system.
- Certification requirements: explosion-proof, sanitary, and other special certifications.
FAQ
What media is VEGAWAVE 62 suitable for?
Suitable for most liquids and solid bulk materials, including water, oil, acid and alkali solutions, powders, granules, etc. For strongly adhesive media, it is recommended to use a coated fork body.
How to obtain the VEGAWAVE 62 Chinese manual?
Click the download link at the top of this article to obtain the PDF version. For more technical support, please contact your local distributor.