1. Overview of the MMP20 Portable Moisture Analyzer
The portable moisture analyzer MMP20 is an industrial instrument used for rapid on-site measurement of moisture content in gases or liquids. Its Chinese manual is an important basis for users to operate, maintain, and troubleshoot correctly. Based on original manufacturer materials, this article systematically organizes the core information of the MMP20 for the convenience of engineering technicians and procurement personnel.
Download MMP20 Chinese Manual.pdf
2. Main Technical Parameters of the MMP20
The table below lists the typical technical specifications of the MMP20 for selection and comparison reference. The specific values are subject to the accompanying Chinese manual.
| Parameter | Typical Value |
|---|---|
| Measurement Principle | Capacitive/dew point method (depending on model) |
| Humidity Range | -100 to +20 °C dew point |
| Accuracy | ±2 °C dew point |
| Response Time | T90 < 30 s |
| Operating Temperature | -20 to +60 °C |
| Power Supply | Rechargeable lithium battery |
| Protection Rating | IP65 (optional) |
3. MMP20 Operating Steps
3.1 Power On and Warm-Up
- Press the power button; the instrument self-checks and displays the current humidity value.
- It is recommended to warm up for 5–10 minutes to ensure sensor stability.
3.2 Measurement and Reading
- Insert the sampling probe into the gas or liquid pipeline to be measured.
- Wait for the reading to stabilize, and record the dew point temperature or volume ratio humidity.
- If necessary, use the conversion table in the Chinese manual for unit conversion.
3.3 Power Off and Storage
- Remove the probe, clean it, and dry it.
- Long press the power button to turn it off, and store it in a dry environment.
4. Maintenance and Precautions
- Regular calibration: It is recommended to send for inspection or use standard gas for calibration every 6–12 months.
- Avoid condensation: When measuring high-temperature and high-humidity gases, ensure the probe temperature is above the dew point.
- Clean the probe: Gently wipe with a soft cloth dipped in anhydrous ethanol; do not scrape with hard objects.
- Battery care: If not used for a long time, charge once every 3 months.
5. Frequently Asked Questions (FAQ)
5.1 What should I do if the MMP20 displayed value fluctuates greatly?
Check whether the probe is contaminated or has condensation; clean and dry it, then warm it up again. If it still fluctuates, refer to the Chinese manual for calibration.
5.2 How can I obtain the MMP20 Chinese manual?
Click the PDF icon at the top of this article to download the MMP20 Chinese manual. If you need a paper version, please contact the supplier.
6. Summary
The portable moisture analyzer MMP20, with its portable design and stable performance, is widely used in industrial gas, compressed air, and liquid moisture detection. Correctly using the operation and maintenance guidelines in the Chinese manual can extend the instrument's service life and ensure measurement accuracy. When purchasing, please verify the technical parameters and protection rating to ensure they meet on-site requirements.