工作原理
Sonatax sc 污泥界面仪（超声波泥位计）使用来自超声波脉冲的回声信号来测量污泥界面值，通过计算超声波返回探头的时间得出污泥层的高度和厚度。
典型应用
Sonatax sc 污泥界面仪（超声波泥位计）可用于需要监测固液分界面的场合，污水厂的初沉池、二沉池、污泥浓缩池的污泥界面测定；自来水厂沉淀池泥位测定。
特性和优点
● Sonatax sc 污泥界面仪（超声波泥位计）利用超声波测量原理，自动温度补偿，测量准确。
● 污泥界面仪/污泥界面计可测量深至12米的池体。
● 污泥界面仪/污泥界面计具有自动报警功能，避免污泥损失。
● 污泥界面仪/污泥界面计自动校准、磁力自清洗，维护量小。
● Sonatax sc 污泥界面仪（超声波泥位计）可与sc控制器连接，接入多个传感器。
● Sonatax sc 污泥界面仪（超声波泥位计）适用于污水处理的初沉池、二沉池、污泥浓缩池的污泥界面测定；自来水厂沉淀池泥位测定。
测量范围： 0.2～12m
分辨率： < 0.04m
精度： 0.1m ± 0.05m
响应时间： 10～600s（可调）
校准： 只须在开机时进行一次；自动
压力范围： ≤ 0.3bar
环境温度： 0～50℃
温度补偿： 自动补偿
防护等级： IP68
流速要求： ≤ 3m/s
尺寸： 130mm × 185mm（H × D）
重量： 约 3.5Kg
维护： 常规 < 1 小时 / 月
电缆线长： 10m，至少延长 100m
控制器： sc200 型或 sc1000
订购指南
2976300 包含一个SONATAX sc 探头，转肘式安装附件和sc200标准控制器
2976200 包含一个SONATAX sc 探头，转肘式安装附件和带有RS232/RS485 输出的sc200 标准控制器
2976100 包含一个SONATAX sc 探头，转肘式安装附件和带有Profibus DP的sc200 标准控制器
其他关于sc200的订购信息请参考sc200的订购说明
单项定货
LXV431.99.00002 1个SONATAX sc 污泥界面探头
57730-00 1个SONATAX sc污泥界面探头，带有转肘式安装附件
附件
LZX328 探头的擦拭器刮片，仅供更换，每包5 个
LZX414.00.70000 探头固定式安装支架
LZX414.00.71000 探头转肘式安装支架
LZX414.00.73000 探头栏杆式安装支架
在定购栏杆式安装组件时，一定要结合定购以下部件之一：
LZX414.00.70000 或LZX414.00.71000 ！！！
电缆附件
57960-00 7.6 m (25 ft.) 延长电缆
57961-00 15.2 m (50 ft.) 延长电缆
57962-00 30.5 m (100 ft.) 延长电缆
来源:哈希水质网站公开信息
Case Studies
Municipal Wastewater Treatment — Wastewater Treatment Plant · Controllers and Sensors Application Case
Project Background
Municipal Wastewater Treatment customers at the Wastewater Treatment Plant stage have long faced the challenge of insufficient accuracy in effluent quality monitoring and instruments prone to contamination causing data drift, affecting compliance discharge, placing higher demands on the stability and measurement accuracy of Controllers and Sensors.
Solution
Based on the on-site conditions, the Ainstru technical team selected suitable Controllers and Sensors for the customer and delivered one-stop service covering selection, installation, commissioning and tuning.
Results
- Measurement accuracy and response speed significantly improved, with stable and reliable data;
- Instruments adapt to complex Municipal Wastewater Treatment conditions, greatly reducing maintenance;
- Helping customers achieve continuous online monitoring and cost reduction, highly recognized by customers.
Food & Beverage — Food Production Line · Controllers and Sensors Application Case
Project Background
Food & Beverage customers at the Food Production Line stage have long faced the challenge of high hygienic measurement requirements, with inline instruments needing to withstand CIP/SIP cleaning while maintaining stable accuracy, placing higher demands on the stability and measurement accuracy of Controllers and Sensors.
Solution
Based on the on-site conditions, the Ainstru technical team selected suitable Controllers and Sensors for the customer and delivered one-stop service covering selection, installation, commissioning and tuning.
Results
- Measurement accuracy and response speed significantly improved, with stable and reliable data;
- Instruments adapt to complex Food & Beverage conditions, greatly reducing maintenance;
- Helping customers achieve continuous online monitoring and cost reduction, highly recognized by customers.
Chemical & Pharmaceutical — Reactors and Storage Tanks · Controllers and Sensors Application Case
Project Background
Chemical & Pharmaceutical customers at the Reactors and Storage Tanks stage have long faced the challenge of highly corrosive media and complex conditions, requiring corrosion-resistant and explosion-proof instruments, placing higher demands on the stability and measurement accuracy of Controllers and Sensors.
Solution
Based on the on-site conditions, the Ainstru technical team selected suitable Controllers and Sensors for the customer and delivered one-stop service covering selection, installation, commissioning and tuning.
Results
- Measurement accuracy and response speed significantly improved, with stable and reliable data;
- Instruments adapt to complex Chemical & Pharmaceutical conditions, greatly reducing maintenance;
- Helping customers achieve continuous online monitoring and cost reduction, highly recognized by customers.
Power & Energy — Power Plant Boiler and Turbine · Controllers and Sensors Application Case
Project Background
Power & Energy customers at the Power Plant Boiler and Turbine stage have long faced the challenge of unstable measurement under high temperature and pressure, with high maintenance and downtime costs, placing higher demands on the stability and measurement accuracy of Controllers and Sensors.
Solution
Based on the on-site conditions, the Ainstru technical team selected suitable Controllers and Sensors for the customer and delivered one-stop service covering selection, installation, commissioning and tuning.
Results
- Measurement accuracy and response speed significantly improved, with stable and reliable data;
- Instruments adapt to complex Power & Energy conditions, greatly reducing maintenance;
- Helping customers achieve continuous online monitoring and cost reduction, highly recognized by customers.
