TR13温度计备件表概述
TR13温度计是工业温度测量中的常用仪表，其备件管理对维护和采购至关重要。本备件表列出了TR13温度计所需的各类备件，包括导热油、垫片、陶瓷接线端、传感器、变送器等，并提供了订货号、描述、推荐等级、位置和组别信息。以下内容将帮助您快速查找和选择正确的备件。
备件详细列表
下表列出了TR13温度计的备件信息，包括订货号、描述、推荐等级（A表示常用，S表示标准，+表示可选，T表示工具）、位置和组别。
| 订货号 | 描述 | 推荐 | 位置 | 组别 | |
|---|---|---|---|---|---|
| 71249291 | 导热油 FDA认证 30g | A | 没有被分类的 | ||
| 71312729 | 导热油 HSC 340, 100g | A | 没有被分类的 | ||
| 71367427 | 垫片 Packing unit: 10 pieces | S | 没有被分类的 | ||
| 71111513 | 陶瓷接线端 | A | C | 终端模块 | |
| 71111514 | 陶瓷接线端 | A | C | 终端模块 | |
| 71111515 | 陶瓷接线端 | A | C | 终端模块 | |
| 52028179 | 垫圈 Profile gasket for cover Stainless steel housing F15 | S | 没有被分类的 | ||
| 60017971 | 显示屏 Display LC for TA20J | S | 没有被分类的 | ||
| 71043745 | 大气补偿过滤口 Consists of: filter plug plastic, Pressure compensation filter, O-ring. Usage: housing F15. Non Ex. | S | 没有被分类的 | ||
| 71044061 | 设备包 2x screws, 2x springs, 2x spring rings, 1x sealing CDI-connector | S | 没有被分类的 | ||
| 71313382 | 连接器 | S | 没有被分类的 | ||
| 71142762 | O型圈 | S | 没有被分类的 | ||
| TS111- | iTHERM TS111 芯子 Replaceable. Metric version according DIN43735. | + | S | 传感器 | |
| TPR100- | 热电阻芯 TPR100 Mineral insulated cable (MgO) Replaceable insert acc. EN60751. max. measuring range: -200...600 oC (depending on configuration) | + | S | 传感器 | |
| TA730- | 保护套管 TA730 In PTFE, PVDF, Tantalum or Titanium for thermowells **TW13, TR13 and TC13 according to DIN Form F. Formula for calculating the total length: Titanium or Tantalum: TL = U + 3mm (0.12in) PTFE: TL = U + 15mm (0.6in) PVDF: TL = U + 18mm (0.71in) | S | F | 组装/铠装配件 | |
| TW13- | **保护套管 TW13 with flange connection. Protection tube acc. DIN 43772 /2F+3F welded version. | S | E | 组装/铠装 | |
| TR88- | **热电阻 TR88 to screw-in. Neck DIN43772. Replaceable insert, MgO. max. measuring range: -200...600 oC (depending on configuration) | S | 没有被分类的 | ||
| TA20A- | **接线盒 TA20A Product being phased out, limited availability. Connection head to mount a measuring insert with head transmitter or a connection socket. To be mounted on an armature or protective sleeve. Material: Aluminium epoxy resin coating Area temperature: max. +100 oC; ATEX: +95 oC. | S | D | 外壳/外壳附件 | |
| TA20B- | 接线盒 TA20B Connecting head to mount a measuring insert with head transmitter or a connection socket. To be mounted on an armature or protective sleeve. Material: Polyamid black Ambient temperature: max. +80 oC Protection: IP65 | S | D | 外壳/外壳附件 | |
| TA20D- | **接线盒 TA20D Product Phased Out. Connection head to mount a measuring insert with up to two head transmitters or a connection socket and one head transmitter. For mounting on armature or protection sleeve. Material: Aluminium, varnished Ambient temperature: max. +100 oC; ATEX: +95 oC. Protection: IP66 | S | D | 外壳/外壳附件 | |
| TA20R- | **接线盒 TA20R Stainless steel AISI 316L W 1.4404. Max temperature 100 oC, ATEX: +95 oC. Protection class IP66/IP67 | S | D | 外壳/外壳附件 | |
| TA20W- | **接线盒 TA20W Product Phased Out. Connection head hinged to mount a measuring insert with head transmitter or connection socket. To be mounted on an armature or a protection sleeve. Material: Aluminium Area temperature: max. +100 oC; ATEX: +95 oC Protection: IP66 | S | D | 外壳/外壳附件 | |
| TA21E- | 接线盒 TA21E Retainer for terminal block or head transmitter. Cover: screwable. Material: Aluminum. Max. temp.: +100 oC; ATEX +95 oC. Protection: IP65. | S | D | 外壳/外壳附件 | |
| TMT84- | 模块温度变送器 TMT84 Dual sensor input. Advanced diagnostics: sensor monitoring. Galvanic isolation 2kV. Application: RTC, TC, Ohm, mV. Current consumption: 11 mA. Mounting: head form B, DIN43729. Factory setup: CH1: Pt100, 3-wire, oC CH2: inactive Differing configuration optional selectable. | + | S | B | 电子的（传感器） |
| TMT85- | 模块温度变送器 TMT85 Temperature transmitter with dual sensor input and advanced diagnostics for sensor monitoring. FOUNDATION Fieldbus protocol (ITK 5.0). Galvanic isolation 2 kV (sensor input to the output). Application: RTC, TC, Ohm, mV. Current consumption: 11 mA. Mounting: head form B, DIN43729. UL listed, CSA General Purpose. | + | S | B | 电子的（传感器） |
| TID10- | 温度变送器显示器 TID10 to plug on. Dot-Matrix measured value display. 12 DIP-switches buttom side. Settings: FF: Simulation, Write Lock. PA: Bus address, Write Lock. Compatible: TMT85, TMT84. | + | S | B | 电子的（传感器） |
| READWIN- | Readwin 2000调试包 READWIN Readwin 2000 Operation + Read. software | T | 没有被分类的 | ||
| TXU10- | 仪表调试包 TXU10 用于可以PC编程调试的设备程序设置+用于带USB接口的PC的连接线 | + | A | 没有被分类的 | |
| FXA195- | 通讯接口 FXA195 Modem to connect HART field devices to a computer via USB. Commissioning of field devices with software tool. :: To connect to a intrinsically safe signal circuit. :: SIL2, IEC61508. | T | 没有被分类的 | ||
| TA30A- | 接线头 TA30A Retainer for terminal block or head transmitter + optional display. Cover: low, hinged, optional window. Material: aluminium. Coating: polyester powder-coating. Colour: body blue, cover grey. Ambient temp.: -50...150 oC (housing). Protection: IP66/68, NEMA 4X (housing). | S | D | 外壳/外壳附件 | |
| TA30D- | 接线头 TA30D Retainer for 2 head transmitters or terminal blocks. Cover: high, hinged. Material: aluminium. Coating: polyester powder-coating. Colour: body blue, cover grey. Ambient temp.: -50...150 oC (housing). Protection: IP66/68, NEMA 4X (housing). | S | D | 外壳/外壳附件 | |
| TA30P- | 接线盒 TA30P Retainer for 2 head transmitters or terminal blocks. Cover: high, hinged. Material: Polyamid PA12 antistatic. Colour: black. Ambient temp.: -40...120oC (housing). Protection: IP65 (housing). | S | D | 外壳/外壳附件 | |
| TMT180- | 模块温度变送器 TMT180 Temperature transmitter, PC-programable. Application: RTD. 2-wire 4-20mA. Fault reaction: NAMUR NE 43. Mounting: head form B, DIN EN50446. UL listed. | + | S | B | 电子的（传感器） |
| TMT181- | **模块温度变送器 TMT181 Product being phased out, limited availability. Temperature transmitter, PC-programmable. Application: RTD, TC, Ohm, mV. 2-wire 4-20mA, galvanic isolation. Fault reaction: NAMUR NE 43. Mounting: head form B, DIN EN50446. UL listed. | + | S | B | 电子的（传感器） |
| TMT182- | **模块温度变送器 TMT182 Temperature transmitter, Protocol HART. Application: RTD, TC, Ohm, mV. 2-wire 4-20mA, SIL2, galvanic isolation Fault reaction: NAMUR NE 43. Mounting: head form B, DIN43729. UL listed. GL (German Llyod) Marine. | + | S | B | 电子的（传感器） |
| TMT82- | 模块温度变送器 TMT82 2-wire temperature transmitter. Dual universal sensor input. Galvanic isolation 2kV (input/output). Application: RTD, TC, Ohm and mV. :: Highly reliable due to drift detection and sensor back up. :: Optional also for safety critical applications by means of SIL 2/3 acc. to IEC61508. | + | S | B | 电子的（传感器） |
| DIENST- | 服务 | A | 没有被分类的 | ||
| TR13- | **热电阻 TR13 with flange connection. Thermowell acc. DIN43772/2F+3F. Replaceable insert, MgO. max. measuring range: -200...600 oC. (depending on configuration). | S | 没有被分类的 | ||
| XPRFID- | RFID TAG as spare part available only for instruments with option TZD, marking RFID TAG Spare RFID TAG Consists of: RFID TAG, fixing wire, crimp sleeve. | S | 没有被分类的 |
备件选型与使用建议
如何选择导热油
导热油用于温度计传热，确保测量准确性。推荐使用FDA认证导热油（30g）或HSC 340导热油（100g），根据应用环境选择。FDA认证适用于食品医药行业，HSC 340适用于高温环境。
垫片与密封件
垫片和O型圈用于密封，防止泄漏。备件表中提供了垫片Packing unit（10件装）和O型圈，建议定期检查更换。
传感器与变送器
传感器是温度计的核心部件，备件包括TS111芯子、TPR100热电阻芯等，均符合DIN标准。变送器如TMT84、TMT85支持多种信号输入，具有高级诊断功能。选择时需注意测量范围、输出信号和认证要求。
外壳与附件
接线盒和外壳保护内部元件，备件包括TA20系列、TA30系列等，材质有铝、不锈钢和塑料，适用于不同环境。防护等级最高达IP68，满足严苛工业环境。
常见问题解答（FAQ）
- 如何确定备件的推荐等级？ 推荐等级A表示常用备件，S表示标准备件，+表示可选，T表示工具。根据维护需求选择。
- 备件是否适用于其他型号？ 部分备件如传感器和变送器可能通用，但建议核对型号和规格。
- 如何获取技术支持？ 可联系供应商或参考官方文档，确保正确选型。
总结
TR13温度计备件表提供了全面的备件信息，帮助您快速定位所需部件。正确选型和定期更换备件可确保温度计长期稳定运行。如需更多信息，请咨询专业技术人员。