Nr
Order Code
Specification
71044061
Device Package
2x screws, 2x springs, 2x spring rings,
1x sealing CDI-connector
71367414
Spare parts kit copper ring G1/2",(10 p)
Packing unit: 10 pieces
71367420
Spare parts kit copper ring G3/4",(10 p)
Packing unit: 10 pieces
71367424
Spare parts kit copper ring G1",(10 p)
Packing unit: 10 pieces
71367425
Spare parts kit copper ring M20x1.5(10p)
Packing unit: 10 pieces
71367427
Spare parts kit ring D21/di 10xgreen,10p
Packing unit: 10 pieces
FXA195-
Communication Interface FXA195
Modem to connect HART field devices
to a computer via USB. Commissioning of
field devices with software tool.
:: To connect to a intrinsically safe
signal circuit.
:: SIL2, IEC61508.
Approval:
G
ATEX II (1)GD [EEx ia] IIC
Additional Option:
1
Basic version
READWIN-
Readwin 2000 Commissioning Package READWIN
Readwin 2000 Operation + Read. software
Memory Medium:
1
CD
Software:
AA
E+H
B
TMT180-
Modular Temperature Transmitter TMT180
Temperature transmitter,PC-programable.
Application: RTD.
2-wire 4-20mA.
Fault reaction: NAMUR NE 43.
Mounting: head form B, DIN EN50446.
UL listed.
Approval:
A
Non-hazardous area
B
CSA General Purpose
C
FM NI, Class I, Div. 2, Group ABCD
D
CSA NI, Class I, Div.2, Group ABCD
I
FM/CSA NI, Class I, Div. 2, Group ABCD
Programming:
1
Via PC
2
Blocked
Measuring Range; Accuracy:
1
-200...650oC; 0.2K / 0,08% span
2
-50...250oC; 0.1K / 0,08% span
Configuration Connection:
3
RTD 3-wire
4
RTD 4-wire
Configuration Range:
XX
See additional spec., min span 10K
Additional Option:
A
Standard - DIN mounting set
B
TMT181-
Modular Temperature Transmitter TMT181
Temperature transmitter,PC-programmable.
Application: RTD, TC, Ohm, mV.
2-wire 4-20mA, galvanic isolation.
Fault reaction: NAMUR NE 43.
Mounting: head form B, DIN EN50446.
UL listed.
Approval:
A
Non-hazardous area
B
ATEX II1G Ex ia IIC T4/T5/T6
Configuration Connection:
3
RTD 3-wire
4
RTD 4-wire
Configuration Sensor Type:
1
Pt100, -200...850oC, min. span 10K, IEC751 (a = 0,00385)
Configuration:
B
Measuring range, see additional spec.
Additional Option:
A
Standard - DIN mounting set
TXU10-
Instrument Commissioning Package TXU10
For devices that can be PC-programmed and commissioned
Programming setup + connection cable for PC with USB interface
Version:
AA
4 pin plug + ReadWin2000
B
TMT84-
Modular Temperature Transmitter TMT84
Dual sensor input.
Advanced diagnostics: sensor monitoring.
Galvanic isolation 2kV.
Application: RTC, TC, Ohm, mV.
Current consumption: 11 mA.
Mounting: head form B, DIN43729.
Factory setup:
CH1: Pt100, 3-wire, oC
CH2: inactive
Differing configuration optional
selectable.
Approval:
A1
Non-hazardous area
B1
ATEX II1G Ex ia IIC T4/T5/T6
Output Signal:
A
PROFIBUS PA
Electrical Connection:
1
Spring terminals, housing form B, DIN EN 50446
2
Screw terminals, housing form B, DIN EN 50446
Field Housing:
A
W/o, mounting set DIN standard
>Configuration Input:
B1
Ch1: RTD 3-wire, Ch2: inactive
B3
Ch1: RTD 3-wire, Ch2: RTD 3-wire
C1
Ch1: RTD 4-wire, Ch2: inactive
B
TMT85-
Modular Temperature Transmitter TMT85
Temperature transmitter with dual
sensor input and advanced diagnostics
for sensor monitoring.
FOUNDATION Fieldbus protocol (ITK 5.0).
Galvanic isolation 2 kV
(sensor input to the output).
Application: RTC, TC, Ohm, mV.
Current consumption: 11 mA.
Mounting: head form B, DIN43729.
UL listed, CSA General Purpose.
Approval:
A1
Non-hazardous area
B1
ATEX II1G Ex ia IIC T4/T5/T6
Output Signal:
A
FOUNDATION Fieldbus H1
Electrical Connection:
1
Spring terminals, housing form B, DIN EN 50446
2
Screw terminals, housing form B, DIN EN 50446
Field Housing:
A
W/o, mounting set DIN standard
>Configuration Input:
B1
Ch1: RTD 3-wire, Ch2: inactive
B3
Ch1: RTD 3-wire, Ch2: RTD 3-wire
C1
Ch1: RTD 4-wire, Ch2: inactive
B
TID10-
Temperature Transmitter Display TID10
to plug on.
Dot-Matrix measured value display.
12 DIP-switches buttom side.
Settings:
FF: Simulation, Write Lock.
PA: Bus address, Write Lock.
Compatible: TMT85, TMT84.
Approval:
A1
Non-hazardous area
B1
ATEX II2G Ex ia IIC T4/T5/T6
D
TA20A-
**Connection Head TA20A
Product being phased out,
limited availability.
Connection head to mount a measuring
insert with head transmitter or a
connection socket. To be mounted on an
armature or protective sleeve.
Material: Aluminium epoxy resin coating
Area temperature : max. +100 oC;
ATEX: +95 oC.
Thermometer Connection:
A
M24x1.5
Cable Entry:
5
Gland M20
7
Gland M20 ATEX
Colour:
A
Housing blue, cap grey
Labelling:
1
Standard E+H
D
TA20B-
Connection Head TA20B
Connecting head to mount a measuring
insert with head transmitter or a
connection socket. To be mounted on an
armature or protective sleeve.
Material:Polyamid black
Ambient temperature: max. +80 oC
Protection: IP65
Thermometer Connection:
A
M24x1.5
Cable Entry:
2
Gland M20
Colour:
C
Housing black, cap black
Labelling:
1
Standard E+H
D
TA20D-
**Connection Head TA20D
Product being phased out,
limited availability.
Connection head to mount a measuring
insert with up to two head transmitters
or a connection socket and one head
transmitter. For mounting on armature
or protection sleeve.
Material: Aluminium, varnished
Ambient temperature: max. +100 oC;
ATEX: +95 oC. Protection: IP66
Thermometer Connection:
A
M24x1.5
Electrical Connection:
3
Gland M20
Colour:
B
Housing blue, cap grey
C
Housing blue, cap grey, gland ATEX
Labelling:
1
Standard E+H
D
TA30A-
Terminal Head TA30A
Retainer for terminal block or head
transmitter + optional display.
Cover: low, hinged, optional window.
Material: aluminium.
Coating: polyester powder-coating.
Colour: body blue, cover grey.
Ambient temp.: -50...150 oC (housing).
Protection: IP66/68, NEMA 4X (housing).
Connection Protection Tube Assembly:
1
Thread M24x1.5
Electrical Connection:
A
1x thread M20x1.5
C
1x thread G1/2
Display window:
1
W/o
2
Glass
>Cable Gland; Temp.Range; Protect. Type:
A1
1x Polyamide; -40...+100oC; IP68
A2
1x Polyamide ATEX; -20...+95oC; IP68 für dust-Ex
A3
1x brass ATEX; -20...+130oC; IP68, NEMA 4X for dust Ex
D
TA30D-
Terminal Head TA30D
Retainer for 2 head transmitters or
terminal blocks.
Cover: high, hinged.
Material: aluminium.
Coating: polyester powder-coating.
Colour: body blue, cover grey.
Ambient temp.: -50...150 oC (housing).
Protection: IP66/68, NEMA 4X (housing).
Connection Protection Tube Assembly:
1
Thread M24x1.5
Electrical Connection:
A
Thread M20x1.5
C
Thread G1/2
>Cable Gland; Temp.Range; Protect. Type:
A1
1x Polyamide; -40...+100oC; IP68
A2
1x Polyamide ATEX; -20...+95oC; IP 68 for dust-Ex
A3
1x brass ATEX; -20...+130oC; IP68, NEMA 4X for dust Ex
B
TMT182-
Modular Temperature Transmitter TMT182
Temperature transmitter, Protocol HART.
Application: RTD, TC, Ohm, mV.
2-wire 4-20mA, SIL2, galvanic isolation
Fault reaction: NAMUR NE 43.
Mounting: head form B, DIN43729.
UL listed.
GL (German Llyod) Marine.
Approval:
A
Non-hazardous area
B
ATEX II1G Ex ia IIC T4/T5/T6
Configuration Connection:
E
RTD 3-wire, non-SIL
F
RTD 4-wire, non-SIL
Configuration Sensor Type:
1
Pt100, -200...850oC, min. span 10K, IEC751 (a = 0,00385)
Configuration:
B
Measuring range, see additional spec.
Additional Option:
A
Standard - DIN mounting set
B
TMT82-
Modular Temperature Transmitter TMT82
2-wire temperature transmitter.
Dual universal sensor input.
Galvanic isolation 2kV (input/output).
Application: RTD, TC, Ohm and mV.
::Highly reliable due to drift
detection and sensor back up.
::Optional also for safety critical applications
by means of SIL 2/3 acc. to IEC61508.
Approval:
AA
Non-hazardous area
BA
ATEX II1G Ex ia IIC T4/T5/T6
Communication; Output Signal:
A
HART; 1x 4-20 mA
Electrical Connection:
1
Spring terminals, housing form B, DIN EN 50446
2
Screw terminals, housing form B, DIN EN 50446
Field Housing:
A
W/o, mounting set DIN standard
Configuration Universal Input:
B1
Ch1: RTD 3-wire, Ch2: inactive
B3
Ch1: RTD 3-wire, Ch2: RTD 3-wire
C1
Ch1: RTD 4-wire, Ch2: inactive
Sensor Type Input 1:
A1
Pt100, -200...850oC, min. span 10K, IEC60751 (a = 0.00385)
Sensor Type Input 2:
A1
Pt100, IEC60751 (a = 0.00385)
AA
Inactive
Input; Interconnection:
A1
PV = CH1; CH2 inactive
A2
PV = CH1; SV = CH2
>>Additional Approval:
LA
SIL conformity