Liquicap M FTI52
Technical Data
ComparePoint Level / Liquids
| Measuring Principle | Capacitive Liquid |
| Characteristic / Application | Capacitive Rope probe |
| Specialities | Interface detection Foam detection |
| Ambient temperature | -50 °C ... +70 °C (-58 °F ... +158 °F) With separate housing: -50 °C ... +120 °C (-58°F ... +248 °F) |
| Process temperature | -80 °C ... +200 °C (-112 °F ... +392 °F) |
| Process pressure / max. overpressure limit | Vacuum ... 100 bar (Vacuum ... 1450 psi) |
| Main wetted parts | Insulation material: FEP, PFA 316L |
| Process connection | G 3/4 ... 1 1/2 NPT 3/4 ... 1 1/2 Flange from DN25.../ASME 1".../JIS 10K... |
| Process connection hygienic | Tri-Clamp ISO2852 gap free plated Dairy coupling Flush mount |
| Sensor length | Total length of probe: max 12m (39 ft) |
| Communication | 2- wire 19-253 VAC 3-wire PFM Relay DPDT DC-PNP 8/16 mA |
| Certificates / Approvals | ATEX, FM, CSA, CSA C/US, IEC Ex, TIIS, INMETRO, NEPSI, EAC |
| Safety approvals | Overfill prevention WHG SIL |
| Design approvals | EN 10204-3.1 NACE MR0175 |
| Marine approval | GL/ ABS/ DNV |
| Options | Inactive length Active build-up compensation Separate housing |
| Components | Transmitter PFM: FTC325, FTC625, FTC470Z, FTC471Z 3-wire: FTC325 |
| Application limits | Notice the pressure and temperature derating. Notice for non conductive medium the DK. |
The Liquicap FTI52 uses a cable probe and can be used for limit detection of highly viscous liquids and liquids prone to buildup, as well as for interface and foam detection of conductive liquids. The FTI52 has buildup compensation for reliable measurement. The probe has obtained international approvals from various relevant industries and has a wide range of applications. Wetted parts use corrosion-resistant materials and FDA-approved materials to meet the highest safety standards.
Advantages
Fast and simple calibration and commissioning by key operation
Various approvals and permits for a wide range of applications
Wetted parts use corrosion-resistant materials and FDA-approved materials
Two-stage overvoltage protection prevents vessel discharge (gas discharge tube + protective diode)
Short response time of the measured value
No calibration required after electronics replacement
Automatic electronics monitoring
Areas of application
The Liquicap M FTI51 is preferably used in the following measurement applications:
Applications with high viscosity and buildup tendency
Interface detection between different liquids (e.g. oil/water interface)
Two-point control via one process connection (pump control), foam detection of conductive liquids
The probe has a robust, proven construction (self-sealing cone) and can be used in applications from vacuum to overpressure up to 100bar
E+H Product Configurator
Please enter the product order code to configure
Product comparison
Please enter the order codes of the products to compare in the boxes below (up to three products)
Technical documentation
Technical data
Documents/Manuals/Software
Accessories/Spare parts
Measuring principle video
Case Studies
Municipal Wastewater Treatment — Wastewater Treatment Plant · Capacitance Application Case
Project Background
Municipal Wastewater Treatment customers at the Wastewater Treatment Plant stage have long faced the challenge of insufficient accuracy in effluent quality monitoring and instruments prone to contamination causing data drift, affecting compliance discharge, placing higher demands on the stability and measurement accuracy of Capacitance.
Solution
Based on the on-site conditions, the Ainstru technical team selected suitable Capacitance for the customer and delivered one-stop service covering selection, installation, commissioning and tuning.
Results
- Measurement accuracy and response speed significantly improved, with stable and reliable data;
- Instruments adapt to complex Municipal Wastewater Treatment conditions, greatly reducing maintenance;
- Helping customers achieve continuous online monitoring and cost reduction, highly recognized by customers.
Food & Beverage — Food Production Line · Capacitance Application Case
Project Background
Food & Beverage customers at the Food Production Line stage have long faced the challenge of high hygienic measurement requirements, with inline instruments needing to withstand CIP/SIP cleaning while maintaining stable accuracy, placing higher demands on the stability and measurement accuracy of Capacitance.
Solution
Based on the on-site conditions, the Ainstru technical team selected suitable Capacitance for the customer and delivered one-stop service covering selection, installation, commissioning and tuning.
Results
- Measurement accuracy and response speed significantly improved, with stable and reliable data;
- Instruments adapt to complex Food & Beverage conditions, greatly reducing maintenance;
- Helping customers achieve continuous online monitoring and cost reduction, highly recognized by customers.
Chemical & Pharmaceutical — Reactors and Storage Tanks · Capacitance Application Case
Project Background
Chemical & Pharmaceutical customers at the Reactors and Storage Tanks stage have long faced the challenge of highly corrosive media and complex conditions, requiring corrosion-resistant and explosion-proof instruments, placing higher demands on the stability and measurement accuracy of Capacitance.
Solution
Based on the on-site conditions, the Ainstru technical team selected suitable Capacitance for the customer and delivered one-stop service covering selection, installation, commissioning and tuning.
Results
- Measurement accuracy and response speed significantly improved, with stable and reliable data;
- Instruments adapt to complex Chemical & Pharmaceutical conditions, greatly reducing maintenance;
- Helping customers achieve continuous online monitoring and cost reduction, highly recognized by customers.
Power & Energy — Power Plant Boiler and Turbine · Capacitance Application Case
Project Background
Power & Energy customers at the Power Plant Boiler and Turbine stage have long faced the challenge of unstable measurement under high temperature and pressure, with high maintenance and downtime costs, placing higher demands on the stability and measurement accuracy of Capacitance.
Solution
Based on the on-site conditions, the Ainstru technical team selected suitable Capacitance for the customer and delivered one-stop service covering selection, installation, commissioning and tuning.
Results
- Measurement accuracy and response speed significantly improved, with stable and reliable data;
- Instruments adapt to complex Power & Energy conditions, greatly reducing maintenance;
- Helping customers achieve continuous online monitoring and cost reduction, highly recognized by customers.
Related Products
Endress+HauserLiquicap M FMI51
Endress+HauserMinicap FTC260
Endress+HauserSolicap M FTI55
Endress+HauserLiquicap M FMI52
Endress+HauserMinicap FTC262
Endress+HauserLiquicap M FTI51
Endress+HauserNivector FTI26
Endress+Hauser